Audio System M 12 EVO2
Best box: 78.1 L bass reflex tuned to 32.6 Hz · F3 31.1 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Audio System M 12 EVO2 against your space and targets — instant, no sign-up.
Estimated retail 300.00 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 12.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Audio System M 12 EVO2 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- The textbook alignment (78.1 L at 29.6 Hz) would need a 123.3 cm port; the recommendation is retuned to 78.1 L at 32.6 Hz so the port can be built.
- Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
- Port length (99.2 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.
Recommended Bass Reflex (Vented)
PORT NEEDS ELBOW / 3D| Net Box Volume (Vb) | 78.1 Liters |
| Tuning Frequency (Fb) | 32.6 Hz |
| F3 (-3 dB Cutoff) | 31.1 Hz |
| F6 / F10 Extension | 28.4 Hz / 25.7 Hz |
| Port Inner Diameter ESTIMATED | Ø 20.0 cm |
| Port Physical Length | 99.2 cm |
| First Pipe Resonance | 173.0 Hz |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 34.5 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 53.0 Hz |
| F3 (-3 dB Cutoff) | 84.0 Hz |
| F6 / F10 Extension | 56.1 Hz / 38.2 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 33.0 Hz |
| Total Q (Qts) | 0.43 |
| Electrical Q (Qes) | 0.482 |
| Mechanical Q (Qms) | 4.01 |
| Equivalent Volume (Vas) | 58.7 Liters |
| Diaphragm Area (Sd) | 510.0 cm² |
| DC Resistance (Re) | 2.0 Ω |
| Efficiency Bandwidth Product (EBP) | 68.5 |
| Linear Excursion (Xmax) | N/A mm |
| Thermal Power (Pe) | N/A W |
| Nominal Diameter | 12.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Audio System M 12 EVO2?
Load Forge's calculated alignment puts Audio System M 12 EVO2 in a 78.1 liter vented enclosure tuned to 32.6 Hz, reaching an F3 cutoff of approximately 31.1 Hz.
Can Audio System M 12 EVO2 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 34.5 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 84.0 Hz.
What port dimensions should be used for Audio System M 12 EVO2 to avoid port chuffing?
Xmax is not published for Audio System M 12 EVO2, so the port is an empirical estimate: a 20.0 cm diameter with a length of 99.2 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if M 12 EVO2 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space