B&C Speakers B&C 15BG100 15" Neodymium Subwoofer
Best box: 118.0 L bass reflex tuned to 31.7 Hz · F3 29.6 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the B&C Speakers B&C 15BG100 15" Neodymium Subwoofer against your space and targets — instant, no sign-up.
Estimated retail 510.60 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the B&C Speakers B&C 15BG100 15" Neodymium Subwoofer does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 118.0 Liters |
| Tuning Frequency (Fb) | 31.7 Hz |
| F3 (-3 dB Cutoff) | 29.6 Hz |
| F6 / F10 Extension | 26.5 Hz / 23.5 Hz |
| Port Inner Diameter | Ø 12.5 cm |
| Port Physical Length | 22.1 cm |
| First Pipe Resonance | 779.0 Hz |
| Estimated MOL @ F3 | 120.6 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 52.4 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 56.4 Hz |
| F3 (-3 dB Cutoff) | 54.4 Hz |
| F6 / F10 Extension | 42.0 Hz / 32.2 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 36.0 Hz |
| Total Q (Qts) | 0.44 |
| Electrical Q (Qes) | 0.482 |
| Mechanical Q (Qms) | 5.0 |
| Equivalent Volume (Vas) | 83.0 Liters |
| Diaphragm Area (Sd) | 855.0 cm² |
| DC Resistance (Re) | 5.1 Ω |
| Efficiency Bandwidth Product (EBP) | 74.6 |
| Linear Excursion (Xmax) | 10.5 mm |
| Thermal Power (Pe) | 2000.0 W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for B&C Speakers B&C 15BG100 15" Neodymium Subwoofer?
Load Forge's calculated alignment puts B&C Speakers B&C 15BG100 15" Neodymium Subwoofer in a 118.0 liter vented enclosure tuned to 31.7 Hz, reaching an F3 cutoff of approximately 29.6 Hz.
Can B&C Speakers B&C 15BG100 15" Neodymium Subwoofer be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 52.4 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 54.4 Hz.
What port dimensions should be used for B&C Speakers B&C 15BG100 15" Neodymium Subwoofer to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 12.5 cm with a length of 22.1 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if B&C 15BG100 15" Neodymium Subwoofer fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space