B&C Speakers B&C 15NDL76 15" Neodymium Woofer
Best box: 37.4 L bass reflex tuned to 60.7 Hz · F3 71.6 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the B&C Speakers B&C 15NDL76 15" Neodymium Woofer against your space and targets — instant, no sign-up.
Estimated retail 305.40 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the B&C Speakers B&C 15NDL76 15" Neodymium Woofer does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 37.4 Liters |
| Tuning Frequency (Fb) | 60.7 Hz |
| F3 (-3 dB Cutoff) | 71.6 Hz |
| F6 / F10 Extension | 60.7 Hz / 51.5 Hz |
| Port Inner Diameter | Ø 15.0 cm |
| Port Physical Length | 27.7 cm |
| First Pipe Resonance | 621.0 Hz |
| Estimated MOL @ F3 | 124.1 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 20.6 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 111.7 Hz |
| F3 (-3 dB Cutoff) | 108.9 Hz |
| F6 / F10 Extension | 83.6 Hz / 63.5 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 37.0 Hz |
| Total Q (Qts) | 0.22 |
| Electrical Q (Qes) | 0.231 |
| Mechanical Q (Qms) | 4.5 |
| Equivalent Volume (Vas) | 192.6 Liters |
| Diaphragm Area (Sd) | 855.0 cm² |
| DC Resistance (Re) | 5.3 Ω |
| Efficiency Bandwidth Product (EBP) | 160.0 |
| Linear Excursion (Xmax) | 7.0 mm |
| Thermal Power (Pe) | 1000.0 W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for B&C Speakers B&C 15NDL76 15" Neodymium Woofer?
Load Forge's calculated alignment puts B&C Speakers B&C 15NDL76 15" Neodymium Woofer in a 37.4 liter vented enclosure tuned to 60.7 Hz, reaching an F3 cutoff of approximately 71.6 Hz.
Can B&C Speakers B&C 15NDL76 15" Neodymium Woofer be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 20.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 108.9 Hz.
What port dimensions should be used for B&C Speakers B&C 15NDL76 15" Neodymium Woofer to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 15.0 cm with a length of 27.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if B&C 15NDL76 15" Neodymium Woofer fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space