B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm
Best box: 16.4 L bass reflex tuned to 111.8 Hz · F3 114.8 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm against your space and targets — instant, no sign-up.
Estimated retail 753.96 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 18.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- The textbook alignment (16.4 L at 62.1 Hz) would need a 202.4 cm port; the recommendation is retuned to 16.4 L at 111.8 Hz so the port can be built.
- Port length (98.7 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.
Recommended Bass Reflex (Vented)
PORT NEEDS ELBOW / 3D| Net Box Volume (Vb) | 16.4 Liters |
| Tuning Frequency (Fb) | 111.8 Hz |
| F3 (-3 dB Cutoff) | 114.8 Hz |
| F6 / F10 Extension | 104.3 Hz / 92.5 Hz |
| Port Inner Diameter | Ø 32.6 cm |
| Port Physical Length | 98.7 cm |
| First Pipe Resonance | 174.0 Hz |
| Estimated MOL @ F3 | 132.4 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 10.9 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 121.0 Hz |
| F3 (-3 dB Cutoff) | 114.6 Hz |
| F6 / F10 Extension | 88.1 Hz / 66.9 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 30.0 Hz |
| Total Q (Qts) | 0.17 |
| Electrical Q (Qes) | 0.176 |
| Mechanical Q (Qms) | 4.75 |
| Equivalent Volume (Vas) | 177.0 Liters |
| Diaphragm Area (Sd) | 1241.0 cm² |
| DC Resistance (Re) | 3.3 Ω |
| Efficiency Bandwidth Product (EBP) | 170.2 |
| Linear Excursion (Xmax) | 16.5 mm |
| Thermal Power (Pe) | 3400.0 W |
| Nominal Diameter | 18.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm?
Load Forge's calculated alignment puts B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm in a 16.4 liter vented enclosure tuned to 111.8 Hz, reaching an F3 cutoff of approximately 114.8 Hz.
Can B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 10.9 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 114.6 Hz.
What port dimensions should be used for B&C Speakers B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 32.6 cm with a length of 98.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if B&C 18DS115 DS Series 18" High Energy Neodymium Subwoofer 4 Ohm fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space