B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm
Best box: 176.0 L bass reflex tuned to 34.3 Hz · F3 32.8 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm against your space and targets — instant, no sign-up.
Estimated retail 472.38 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 18.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Large enclosure volume (176.0 L) requires extensive internal matrix bracing to prevent panel resonance.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 176.0 Liters |
| Tuning Frequency (Fb) | 34.3 Hz |
| F3 (-3 dB Cutoff) | 32.8 Hz |
| F6 / F10 Extension | 29.4 Hz / 26.1 Hz |
| Port Inner Diameter | Ø 20.0 cm |
| Port Physical Length | 31.2 cm |
| First Pipe Resonance | 552.0 Hz |
| Estimated MOL @ F3 | 125.7 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 76.5 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 60.8 Hz |
| F3 (-3 dB Cutoff) | 65.3 Hz |
| F6 / F10 Extension | 48.1 Hz / 35.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 35.0 Hz |
| Total Q (Qts) | 0.39 |
| Electrical Q (Qes) | 0.41 |
| Mechanical Q (Qms) | 8.0 |
| Equivalent Volume (Vas) | 175.0 Liters |
| Diaphragm Area (Sd) | 1210.0 cm² |
| DC Resistance (Re) | 5.0 Ω |
| Efficiency Bandwidth Product (EBP) | 85.4 |
| Linear Excursion (Xmax) | 12.0 mm |
| Thermal Power (Pe) | 3000.0 W |
| Nominal Diameter | 18.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm?
Load Forge's calculated alignment puts B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm in a 176.0 liter vented enclosure tuned to 34.3 Hz, reaching an F3 cutoff of approximately 32.8 Hz.
Can B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 76.5 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 65.3 Hz.
What port dimensions should be used for B&C Speakers B&C 18TBW100 18" Professional Subwoofer 8 Ohm to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 20.0 cm with a length of 31.2 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if B&C 18TBW100 18" Professional Subwoofer 8 Ohm fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space