Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS
Best box: 235.2 L bass reflex tuned to 22.1 Hz · F3 30.3 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Large enclosure volume (235.2 L) requires extensive internal matrix bracing to prevent panel resonance.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 235.2 Liters |
| Tuning Frequency (Fb) | 22.1 Hz |
| F3 (-3 dB Cutoff) | 30.3 Hz |
| F6 / F10 Extension | 24.8 Hz / 19.1 Hz |
| Port Inner Diameter | Ø 10.0 cm |
| Port Physical Length | 13.3 cm |
| First Pipe Resonance | 1289.0 Hz |
| Estimated MOL @ F3 | 115.3 dB SPL |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.66 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.933; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 294.0 Liters |
| System Q (Qtc) | 0.933 (above Butterworth) |
| System Resonance (Fc) | 36.8 Hz |
| F3 (-3 dB Cutoff) | 30.6 Hz |
| F6 / F10 Extension | 24.8 Hz / 19.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 26.0 Hz |
| Total Q (Qts) | 0.66 |
| Electrical Q (Qes) | 0.765 |
| Mechanical Q (Qms) | 4.81 |
| Equivalent Volume (Vas) | 294.0 Liters |
| Diaphragm Area (Sd) | 855.0 cm² |
| DC Resistance (Re) | 3.3 Ω |
| Efficiency Bandwidth Product (EBP) | 34.0 |
| Linear Excursion (Xmax) | 9.5 mm |
| Thermal Power (Pe) | N/A W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS?
Load Forge's calculated alignment puts Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS in a 235.2 liter vented enclosure tuned to 22.1 Hz, reaching an F3 cutoff of approximately 30.3 Hz.
Can Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 294.0 liters with a Qtc of 0.933 (above Butterworth), the system exhibits an F3 of 30.6 Hz.
What port dimensions should be used for Bomber SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 10.0 cm with a length of 13.3 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if SUBWOOFER 15″ UPGRADE PROFESSIONAL 400 WATTS RMS fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space