Cerwin Vega HS124D
Best box: 50.9 L sealed · Fc 43.8 Hz · F3 36.4 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Cerwin Vega HS124D against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 12.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Cerwin Vega HS124D does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
- Straight vent would be 121.7 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 40.7 Liters |
| Tuning Frequency (Fb) | 26.3 Hz |
| F3 (-3 dB Cutoff) | 40.0 Hz |
| F6 / F10 Extension | 34.2 Hz / 27.1 Hz |
| Port Inner Diameter ESTIMATED | Ø 12.5 cm |
| Port Physical Length | 121.7 cm |
| First Pipe Resonance | 141.0 Hz |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.92 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 1.301; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 50.9 Liters |
| System Q (Qtc) | 1.301 (above Butterworth: Qtc cannot fall below Qts (0.92)) |
| System Resonance (Fc) | 43.8 Hz |
| F3 (-3 dB Cutoff) | 36.4 Hz |
| F6 / F10 Extension | 31.0 Hz / 25.4 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 31.0 Hz |
| Total Q (Qts) | 0.92 |
| Electrical Q (Qes) | 1.127 |
| Mechanical Q (Qms) | 5.0 |
| Equivalent Volume (Vas) | 50.9 Liters |
| Diaphragm Area (Sd) | 532.4 cm² |
| DC Resistance (Re) | 6.03 Ω |
| Efficiency Bandwidth Product (EBP) | 27.5 |
| Linear Excursion (Xmax) | N/A mm |
| Thermal Power (Pe) | N/A W |
| Nominal Diameter | 12.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Cerwin Vega HS124D?
A simple ported box is not recommended for Cerwin Vega HS124D: the textbook alignment (40.7 liters tuned to 26.3 Hz) needs a 121.7 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can Cerwin Vega HS124D be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 50.9 liters with a Qtc of 1.301 (above Butterworth: Qtc cannot fall below Qts (0.92)), the system exhibits an F3 of 36.4 Hz.
What port dimensions should be used for Cerwin Vega HS124D to avoid port chuffing?
A straight 12.5 cm port would need 121.7 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if HS124D fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space