CSS LDW6
Best box: 11.6 L bass reflex tuned to 45.8 Hz · F3 43.3 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the CSS LDW6 against your space and targets — instant, no sign-up.
Estimated retail 209.95 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 5.25" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the CSS LDW6 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 11.6 Liters |
| Tuning Frequency (Fb) | 45.8 Hz |
| F3 (-3 dB Cutoff) | 43.3 Hz |
| F6 / F10 Extension | 38.7 Hz / 34.5 Hz |
| Port Inner Diameter ESTIMATED | Ø 6.8 cm |
| Port Physical Length | 39.9 cm |
| First Pipe Resonance | 431.0 Hz |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 5.1 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 82.7 Hz |
| F3 (-3 dB Cutoff) | 84.2 Hz |
| F6 / F10 Extension | 63.4 Hz / 47.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 50.0 Hz |
| Total Q (Qts) | 0.42 |
| Electrical Q (Qes) | 0.437 |
| Mechanical Q (Qms) | 11.1 |
| Equivalent Volume (Vas) | 9.3 Liters |
| Diaphragm Area (Sd) | 93.0 cm² |
| DC Resistance (Re) | 4.8 Ω |
| Efficiency Bandwidth Product (EBP) | 114.5 |
| Linear Excursion (Xmax) | N/A mm |
| Thermal Power (Pe) | N/A W |
| Nominal Diameter | 5.25" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for CSS LDW6?
Load Forge's calculated alignment puts CSS LDW6 in a 11.6 liter vented enclosure tuned to 45.8 Hz, reaching an F3 cutoff of approximately 43.3 Hz.
Can CSS LDW6 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 5.1 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 84.2 Hz.
What port dimensions should be used for CSS LDW6 to avoid port chuffing?
Xmax is not published for CSS LDW6, so the port is an empirical estimate: a 6.8 cm diameter with a length of 39.9 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if LDW6 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space