Versatile Load

CSS LDW7 7" Midwoofer

Best box: 26.7 L bass reflex tuned to 30.8 Hz · F3 30.5 Hz

Predicted SPL response of the CSS LDW7 7" Midwoofer in the recommended 26.7 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the CSS LDW7 7" Midwoofer against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the LDW7 7" Midwoofer and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the LDW7 7" Midwoofer in the same box

Estimated retail 189.89 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 26.7 Liters
Tuning Frequency (Fb) 30.8 Hz
F3 (-3 dB Cutoff) 30.5 Hz
F6 / F10 Extension 26.9 Hz / 23.6 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 19.7 cm
First Pipe Resonance 875.0 Hz
Estimated MOL @ F3 100.9 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 11.6 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 56.4 Hz
F3 (-3 dB Cutoff) 57.1 Hz
F6 / F10 Extension 43.1 Hz / 32.6 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 30.0 Hz
Total Q (Qts) 0.37
Electrical Q (Qes) 0.386
Mechanical Q (Qms) 9.0
Equivalent Volume (Vas) 30.9 Liters
Diaphragm Area (Sd) 131.0 cm²
DC Resistance (Re) 6.4 Ω
Efficiency Bandwidth Product (EBP) 77.7
Linear Excursion (Xmax) 5.5 mm
Thermal Power (Pe) 80.0 W
Nominal Diameter 7.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for CSS LDW7 7" Midwoofer?

Load Forge's calculated alignment puts CSS LDW7 7" Midwoofer in a 26.7 liter vented enclosure tuned to 30.8 Hz, reaching an F3 cutoff of approximately 30.5 Hz.

Can CSS LDW7 7" Midwoofer be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 11.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 57.1 Hz.

What port dimensions should be used for CSS LDW7 7" Midwoofer to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 19.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

CSS LDW7 7" Midwoofer Enclosure Card
Download SVG Card 📥

Not sure if LDW7 7" Midwoofer fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space