Versatile Load

CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer

Best box: 65.1 L bass reflex tuned to 30.2 Hz · F3 28.7 Hz

Predicted SPL response of the CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer in the recommended 65.1 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer in the same box

Estimated retail 349.99 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • Port length (53.0 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.

Recommended Bass Reflex (Vented)

PORT NEEDS ELBOW / 3D
Net Box Volume (Vb) 65.1 Liters
Tuning Frequency (Fb) 30.2 Hz
F3 (-3 dB Cutoff) 28.7 Hz
F6 / F10 Extension 25.6 Hz / 22.7 Hz
Port Inner Diameter Ø 12.5 cm
Port Physical Length 53.0 cm
First Pipe Resonance 324.0 Hz
Estimated MOL @ F3 89.4 dB SPL
⚠️ Port feasibility: a straight 12.5 cm tube needs 53.0 cm of internal length. Use an elbow bend, a slotted vent or a 3D folded duct.
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 28.6 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 54.7 Hz
F3 (-3 dB Cutoff) 56.1 Hz
F6 / F10 Extension 42.2 Hz / 31.8 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 32.9 Hz
Total Q (Qts) 0.42
Electrical Q (Qes) 0.484
Mechanical Q (Qms) 3.17
Equivalent Volume (Vas) 52.4 Liters
Diaphragm Area (Sd) 855.0 cm²
DC Resistance (Re) 4.0 Ω
Efficiency Bandwidth Product (EBP) 68.0
Linear Excursion (Xmax) 12.0 mm
Thermal Power (Pe) 3.0 W
Nominal Diameter 15.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer?

Load Forge's calculated alignment puts CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer in a 65.1 liter vented enclosure tuned to 30.2 Hz, reaching an F3 cutoff of approximately 28.7 Hz.

Can CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 28.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 56.1 Hz.

What port dimensions should be used for CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 12.5 cm with a length of 53.0 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

CT Sounds MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer Enclosure Card
Download SVG Card 📥

Not sure if MESO-15 // 1500 Watts RMS 15 Inch Car Subwoofer fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space