ETON 5-212/C8/25 HEX
Best box: 11.3 L bass reflex tuned to 47.6 Hz · F3 45.1 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the ETON 5-212/C8/25 HEX against your space and targets — instant, no sign-up.
Estimated retail 149.95 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 5.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the ETON 5-212/C8/25 HEX does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Limited linear excursion (Xmax: 2.5 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 11.3 Liters |
| Tuning Frequency (Fb) | 47.6 Hz |
| F3 (-3 dB Cutoff) | 45.1 Hz |
| F6 / F10 Extension | 40.1 Hz / 35.5 Hz |
| Port Inner Diameter | Ø 5.0 cm |
| Port Physical Length | 19.4 cm |
| First Pipe Resonance | 886.0 Hz |
| Estimated MOL @ F3 | 98.3 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 5.0 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 85.5 Hz |
| F3 (-3 dB Cutoff) | 83.0 Hz |
| F6 / F10 Extension | 64.2 Hz / 49.2 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 53.0 Hz |
| Total Q (Qts) | 0.43 |
| Electrical Q (Qes) | 0.459 |
| Mechanical Q (Qms) | 6.83 |
| Equivalent Volume (Vas) | 8.5 Liters |
| Diaphragm Area (Sd) | 80.0 cm² |
| DC Resistance (Re) | 5.4 Ω |
| Efficiency Bandwidth Product (EBP) | 115.5 |
| Linear Excursion (Xmax) | 2.5 mm |
| Thermal Power (Pe) | 50.0 W |
| Nominal Diameter | 5.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for ETON 5-212/C8/25 HEX?
Load Forge's calculated alignment puts ETON 5-212/C8/25 HEX in a 11.3 liter vented enclosure tuned to 47.6 Hz, reaching an F3 cutoff of approximately 45.1 Hz.
Can ETON 5-212/C8/25 HEX be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 5.0 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 83.0 Hz.
What port dimensions should be used for ETON 5-212/C8/25 HEX to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 19.4 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 5-212/C8/25 HEX fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space