Focal P 25 FE 25 cm
Best box: 44.0 L bass reflex tuned to 26.7 Hz · F3 25.1 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Focal P 25 FE 25 cm against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 10.2" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Focal P 25 FE 25 cm does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Port length (67.9 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.
Recommended Bass Reflex (Vented)
PORT NEEDS ELBOW / 3D| Net Box Volume (Vb) | 44.0 Liters |
| Tuning Frequency (Fb) | 26.7 Hz |
| F3 (-3 dB Cutoff) | 25.1 Hz |
| F6 / F10 Extension | 22.3 Hz / 19.9 Hz |
| Port Inner Diameter | Ø 10.0 cm |
| Port Physical Length | 67.9 cm |
| First Pipe Resonance | 253.0 Hz |
| Estimated MOL @ F3 | 106.0 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 19.7 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 48.2 Hz |
| F3 (-3 dB Cutoff) | 48.4 Hz |
| F6 / F10 Extension | 37.2 Hz / 28.4 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 31.0 Hz |
| Total Q (Qts) | 0.45 |
| Electrical Q (Qes) | 0.5 |
| Mechanical Q (Qms) | 4.5 |
| Equivalent Volume (Vas) | 29.0 Liters |
| Diaphragm Area (Sd) | 347.0 cm² |
| DC Resistance (Re) | 4.0 Ω |
| Efficiency Bandwidth Product (EBP) | 62.0 |
| Linear Excursion (Xmax) | 14.0 mm |
| Thermal Power (Pe) | 300.0 W |
| Nominal Diameter | 10.2" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Focal P 25 FE 25 cm?
Load Forge's calculated alignment puts Focal P 25 FE 25 cm in a 44.0 liter vented enclosure tuned to 26.7 Hz, reaching an F3 cutoff of approximately 25.1 Hz.
Can Focal P 25 FE 25 cm be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 19.7 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 48.4 Hz.
What port dimensions should be used for Focal P 25 FE 25 cm to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 10.0 cm with a length of 67.9 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if P 25 FE 25 cm fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space