GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers
Best box: 411.2 L bass reflex tuned to 24.4 Hz · F3 24.2 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers against your space and targets — instant, no sign-up.
Estimated retail 179.95 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Large enclosure volume (411.2 L) requires extensive internal matrix bracing to prevent panel resonance.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 411.2 Liters |
| Tuning Frequency (Fb) | 24.4 Hz |
| F3 (-3 dB Cutoff) | 24.2 Hz |
| F6 / F10 Extension | 20.7 Hz / 18.3 Hz |
| Port Inner Diameter | Ø 10.0 cm |
| Port Physical Length | 2.5 cm |
| First Pipe Resonance | 6974.0 Hz |
| Estimated MOL @ F3 | 113.7 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 323.0 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 41.0 Hz |
| F3 (-3 dB Cutoff) | 41.6 Hz |
| F6 / F10 Extension | 31.4 Hz / 23.8 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 32.2 Hz |
| Total Q (Qts) | 0.52 |
| Electrical Q (Qes) | 0.542 |
| Mechanical Q (Qms) | 12.61 |
| Equivalent Volume (Vas) | 274.1 Liters |
| Diaphragm Area (Sd) | 855.3 cm² |
| DC Resistance (Re) | 3.52 Ω |
| Efficiency Bandwidth Product (EBP) | 59.4 |
| Linear Excursion (Xmax) | 8.2 mm |
| Thermal Power (Pe) | 200.0 W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers?
Load Forge's calculated alignment puts GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers in a 411.2 liter vented enclosure tuned to 24.4 Hz, reaching an F3 cutoff of approximately 24.2 Hz.
Can GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 323.0 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 41.6 Hz.
What port dimensions should be used for GRS K-33-4 Replacement 15" Woofer for Klipsch Speakers to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 10.0 cm with a length of 2.5 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if K-33-4 Replacement 15" Woofer for Klipsch Speakers fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space