Jensen N 12/100 TR
Best box: 83.8 L bass reflex tuned to 54.5 Hz · F3 53.0 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Jensen N 12/100 TR against your space and targets — instant, no sign-up.
Estimated retail 169.10 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 12.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Jensen N 12/100 TR does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 83.8 Liters |
| Tuning Frequency (Fb) | 54.5 Hz |
| F3 (-3 dB Cutoff) | 53.0 Hz |
| F6 / F10 Extension | 46.0 Hz / 40.7 Hz |
| Port Inner Diameter ESTIMATED | Ø 20.0 cm |
| Port Physical Length | 23.5 cm |
| First Pipe Resonance | 731.0 Hz |
| Estimated MOL @ F3 | 114.0 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 65.9 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 89.9 Hz |
| F3 (-3 dB Cutoff) | 91.0 Hz |
| F6 / F10 Extension | 68.7 Hz / 51.9 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 72.0 Hz |
| Total Q (Qts) | 0.52 |
| Electrical Q (Qes) | 0.55 |
| Mechanical Q (Qms) | 9.51 |
| Equivalent Volume (Vas) | 55.9 Liters |
| Diaphragm Area (Sd) | 490.9 cm² |
| DC Resistance (Re) | 6.81 Ω |
| Efficiency Bandwidth Product (EBP) | 130.9 |
| Linear Excursion (Xmax) | N/A mm |
| Thermal Power (Pe) | 100.0 W |
| Nominal Diameter | 12.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Jensen N 12/100 TR?
Load Forge's calculated alignment puts Jensen N 12/100 TR in a 83.8 liter vented enclosure tuned to 54.5 Hz, reaching an F3 cutoff of approximately 53.0 Hz.
Can Jensen N 12/100 TR be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 65.9 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 91.0 Hz.
What port dimensions should be used for Jensen N 12/100 TR to avoid port chuffing?
Xmax is not published for Jensen N 12/100 TR, so the port is an empirical estimate: a 20.0 cm diameter with a length of 23.5 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if N 12/100 TR fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space