Vented Specialist

Kartesian W130_vHE

Best box: 7.1 L bass reflex tuned to 49.2 Hz · F3 51.4 Hz

Predicted SPL response of the Kartesian W130_vHE in the recommended 7.1 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Kartesian W130_vHE against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the W130_vHE and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the W130_vHE in the same box

Estimated retail 189.00 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 7.1 Liters
Tuning Frequency (Fb) 49.2 Hz
F3 (-3 dB Cutoff) 51.4 Hz
F6 / F10 Extension 44.7 Hz / 38.7 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 30.7 cm
First Pipe Resonance 561.0 Hz
Estimated MOL @ F3 103.6 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 3.2 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 91.3 Hz
F3 (-3 dB Cutoff) 91.6 Hz
F6 / F10 Extension 69.4 Hz / 52.4 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 42.0 Hz
Total Q (Qts) 0.32
Electrical Q (Qes) 0.341
Mechanical Q (Qms) 5.2
Equivalent Volume (Vas) 12.5 Liters
Diaphragm Area (Sd) 95.0 cm²
DC Resistance (Re) 5.6 Ω
Efficiency Bandwidth Product (EBP) 123.2
Linear Excursion (Xmax) 8.0 mm
Thermal Power (Pe) 120.0 W
Nominal Diameter 5.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Kartesian W130_vHE?

Load Forge's calculated alignment puts Kartesian W130_vHE in a 7.1 liter vented enclosure tuned to 49.2 Hz, reaching an F3 cutoff of approximately 51.4 Hz.

Can Kartesian W130_vHE be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 3.2 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 91.6 Hz.

What port dimensions should be used for Kartesian W130_vHE to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 30.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Kartesian W130_vHE Enclosure Card
Download SVG Card 📥

Not sure if W130_vHE fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space