Vented Specialist

Mundorf MA130 5 Inch Midwoofer

Best box: 7.4 L bass reflex tuned to 51.9 Hz · F3 52.0 Hz

Predicted SPL response of the Mundorf MA130 5 Inch Midwoofer in the recommended 7.4 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Mundorf MA130 5 Inch Midwoofer against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the MA130 5 Inch Midwoofer and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the MA130 5 Inch Midwoofer in the same box

Estimated retail 149.00 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 7.4 Liters
Tuning Frequency (Fb) 51.9 Hz
F3 (-3 dB Cutoff) 52.0 Hz
F6 / F10 Extension 45.8 Hz / 40.0 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 26.0 cm
First Pipe Resonance 663.0 Hz
Estimated MOL @ F3 99.9 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 3.2 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 95.2 Hz
F3 (-3 dB Cutoff) 94.9 Hz
F6 / F10 Extension 72.1 Hz / 54.5 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 48.0 Hz
Total Q (Qts) 0.35
Electrical Q (Qes) 0.393
Mechanical Q (Qms) 3.2
Equivalent Volume (Vas) 10.0 Liters
Diaphragm Area (Sd) 80.0 cm²
DC Resistance (Re) 5.8 Ω
Efficiency Bandwidth Product (EBP) 122.1
Linear Excursion (Xmax) 5.0 mm
Thermal Power (Pe) 50.0 W
Nominal Diameter 5.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Mundorf MA130 5 Inch Midwoofer?

Load Forge's calculated alignment puts Mundorf MA130 5 Inch Midwoofer in a 7.4 liter vented enclosure tuned to 51.9 Hz, reaching an F3 cutoff of approximately 52.0 Hz.

Can Mundorf MA130 5 Inch Midwoofer be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 3.2 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 94.9 Hz.

What port dimensions should be used for Mundorf MA130 5 Inch Midwoofer to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 26.0 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Mundorf MA130 5 Inch Midwoofer Enclosure Card
Download SVG Card 📥

Not sure if MA130 5 Inch Midwoofer fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space