P.Audio E-15LF
Best box: 114.7 L bass reflex tuned to 45.8 Hz · F3 42.6 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the P.Audio E-15LF against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the P.Audio E-15LF does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 114.7 Liters |
| Tuning Frequency (Fb) | 45.8 Hz |
| F3 (-3 dB Cutoff) | 42.6 Hz |
| F6 / F10 Extension | 38.4 Hz / 34.2 Hz |
| Port Inner Diameter | Ø 12.5 cm |
| Port Physical Length | 6.4 cm |
| First Pipe Resonance | 2708.0 Hz |
| Estimated MOL @ F3 | 124.3 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 50.3 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 79.8 Hz |
| F3 (-3 dB Cutoff) | 81.0 Hz |
| F6 / F10 Extension | 61.0 Hz / 45.9 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 50.0 Hz |
| Total Q (Qts) | 0.42 |
| Electrical Q (Qes) | 0.456 |
| Mechanical Q (Qms) | 5.29 |
| Equivalent Volume (Vas) | 92.2 Liters |
| Diaphragm Area (Sd) | 850.0 cm² |
| DC Resistance (Re) | 6.1 Ω |
| Efficiency Bandwidth Product (EBP) | 109.6 |
| Linear Excursion (Xmax) | 6.0 mm |
| Thermal Power (Pe) | N/A W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for P.Audio E-15LF?
Load Forge's calculated alignment puts P.Audio E-15LF in a 114.7 liter vented enclosure tuned to 45.8 Hz, reaching an F3 cutoff of approximately 42.6 Hz.
Can P.Audio E-15LF be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 50.3 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 81.0 Hz.
What port dimensions should be used for P.Audio E-15LF to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 12.5 cm with a length of 6.4 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if E-15LF fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space