Vented Specialist

Peerless PRLTC6FC0004

Best box: 1.5 L bass reflex tuned to 121.5 Hz · F3 113.4 Hz

Will it fit your requirements?

Check the Peerless PRLTC6FC0004 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the PRLTC6FC0004 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the PRLTC6FC0004 in the same box

Estimated retail 16.13 GBP · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Comparable 2.0" Drivers

Drivers with similar piston area, resonance and Qts — useful alternatives when the Peerless PRLTC6FC0004 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.

Peerless

TA6FD00-04

2.0" · Fs 146.6 Hz · Qts 0.93 · Vas 0.3 L

Peerless

TA6FD00-08

2.0" · Fs 150.1 Hz · Qts 1.03 · Vas 0.2 L

Peerless

P830983

2.0" · Fs 140.0 Hz · Qts 0.63 · Vas 0.2 L

Wavecor

FR055WA01_02

2.0" · Fs 142.0 Hz · Qts 0.91 · Vas 0.3 L

Tectonic Elements

TEBM35C10-4

2.0" · Fs 145.0 Hz · Qts 0.83 · Vas 0.2 L

Tectonic

TEBM35C10-4 BMR 2" Full Range Speaker 4 Ohm

2.0" · Fs 145.0 Hz · Qts 0.83 · Vas 0.2 L

Compare them in the same box → Browse all 2.0" drivers → All Peerless drivers →

⚠️ Engineering Notice for Builders

Limited linear excursion (Xmax: 1.0 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.

Recommended Bass Reflex (Vented)

PORT BUILDABLE

Net Box Volume (Vb)	1.5 Liters
Tuning Frequency (Fb)	121.5 Hz
F3 (-3 dB Cutoff)	113.4 Hz
F6 / F10 Extension	100.7 Hz / 90.7 Hz
Port Inner Diameter	Ø 5.0 cm
Port Physical Length	23.0 cm
First Pipe Resonance	748.0 Hz
Estimated MOL @ F3	94.4 dB SPL

Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 0.92 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 1.301; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb)	0.57 Liters
System Q (Qtc)	1.301 (above Butterworth: Qtc cannot fall below Qts (0.92))
System Resonance (Fc)	202.2 Hz
F3 (-3 dB Cutoff)	160.1 Hz
F6 / F10 Extension	135.5 Hz / 110.8 Hz
Air Spring Linearity	High (Zero port compression)

Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs)	143.0 Hz
Total Q (Qts)	0.92
Electrical Q (Qes)	1.224
Mechanical Q (Qms)	3.7

Equivalent Volume (Vas)	0.6 Liters
Diaphragm Area (Sd)	22.1 cm²
DC Resistance (Re)	3.2 Ω
Efficiency Bandwidth Product (EBP)	116.8

Linear Excursion (Xmax)	1.0 mm
Thermal Power (Pe)	20.0 W
Nominal Diameter	2.0"
Catalog Source	Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Peerless PRLTC6FC0004?

Load Forge's calculated alignment puts Peerless PRLTC6FC0004 in a 1.5 liter vented enclosure tuned to 121.5 Hz, reaching an F3 cutoff of approximately 113.4 Hz.

Can Peerless PRLTC6FC0004 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 0.57 liters with a Qtc of 1.301 (above Butterworth: Qtc cannot fall below Qts (0.92)), the system exhibits an F3 of 160.1 Hz.

What port dimensions should be used for Peerless PRLTC6FC0004 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 23.0 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Not sure if PRLTC6FC0004 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space