Versatile Load

PURIFI PTT8.0X08-NAB-01

Best box: 54.9 L bass reflex tuned to 25.9 Hz · F3 25.9 Hz

Predicted SPL response of the PURIFI PTT8.0X08-NAB-01 in the recommended 54.9 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the PURIFI PTT8.0X08-NAB-01 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the PTT8.0X08-NAB-01 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the PTT8.0X08-NAB-01 in the same box

Estimated retail 699.95 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 54.9 Liters
Tuning Frequency (Fb) 25.9 Hz
F3 (-3 dB Cutoff) 25.9 Hz
F6 / F10 Extension 22.8 Hz / 20.0 Hz
Port Inner Diameter Ø 6.8 cm
Port Physical Length 24.7 cm
First Pipe Resonance 696.0 Hz
Estimated MOL @ F3 112.1 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 24.2 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 47.6 Hz
F3 (-3 dB Cutoff) 48.6 Hz
F6 / F10 Extension 36.4 Hz / 27.3 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 24.0 Hz
Total Q (Qts) 0.35
Electrical Q (Qes) 0.372
Mechanical Q (Qms) 5.8
Equivalent Volume (Vas) 74.5 Liters
Diaphragm Area (Sd) 235.1 cm²
DC Resistance (Re) 6.0 Ω
Efficiency Bandwidth Product (EBP) 64.4
Linear Excursion (Xmax) 9.3 mm
Thermal Power (Pe) N/A W
Nominal Diameter 8.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for PURIFI PTT8.0X08-NAB-01?

Load Forge's calculated alignment puts PURIFI PTT8.0X08-NAB-01 in a 54.9 liter vented enclosure tuned to 25.9 Hz, reaching an F3 cutoff of approximately 25.9 Hz.

Can PURIFI PTT8.0X08-NAB-01 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 24.2 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 48.6 Hz.

What port dimensions should be used for PURIFI PTT8.0X08-NAB-01 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 6.8 cm with a length of 24.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

PURIFI PTT8.0X08-NAB-01 Enclosure Card
Download SVG Card 📥

Not sure if PTT8.0X08-NAB-01 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space