Rockford Fosgate T2D415
Best box: 72.3 L bass reflex tuned to 26.3 Hz · F3 28.0 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Rockford Fosgate T2D415 against your space and targets — instant, no sign-up.
Estimated retail 134400.00 JPY · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Rockford Fosgate T2D415 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- The textbook alignment (41.3 L at 26.3 Hz) would need a 174.7 cm port; the recommendation is retuned to 72.3 L at 26.3 Hz so the port can be built.
- Port length (95.2 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.
Recommended Bass Reflex (Vented)
PORT NEEDS ELBOW / 3D| Net Box Volume (Vb) | 72.3 Liters |
| Tuning Frequency (Fb) | 26.3 Hz |
| F3 (-3 dB Cutoff) | 28.0 Hz |
| F6 / F10 Extension | 23.0 Hz / 19.7 Hz |
| Port Inner Diameter | Ø 15.0 cm |
| Port Physical Length | 95.2 cm |
| First Pipe Resonance | 181.0 Hz |
| Estimated MOL @ F3 | 115.0 dB SPL |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.62 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.877; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 51.6 Liters |
| System Q (Qtc) | 0.877 (above Butterworth) |
| System Resonance (Fc) | 43.8 Hz |
| F3 (-3 dB Cutoff) | 38.6 Hz |
| F6 / F10 Extension | 31.0 Hz / 24.3 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 31.0 Hz |
| Total Q (Qts) | 0.62 |
| Electrical Q (Qes) | 0.699 |
| Mechanical Q (Qms) | 5.49 |
| Equivalent Volume (Vas) | 51.6 Liters |
| Diaphragm Area (Sd) | 750.0 cm² |
| DC Resistance (Re) | 6.8 Ω |
| Efficiency Bandwidth Product (EBP) | 44.4 |
| Linear Excursion (Xmax) | 22.4 mm |
| Thermal Power (Pe) | 1200.0 W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Rockford Fosgate T2D415?
Load Forge's calculated alignment puts Rockford Fosgate T2D415 in a 72.3 liter vented enclosure tuned to 26.3 Hz, reaching an F3 cutoff of approximately 28.0 Hz.
Can Rockford Fosgate T2D415 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 51.6 liters with a Qtc of 0.877 (above Butterworth), the system exhibits an F3 of 38.6 Hz.
What port dimensions should be used for Rockford Fosgate T2D415 to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 15.0 cm with a length of 95.2 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if T2D415 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space