Versatile Load

Rockville RVP12W8

Best box: 47.0 L bass reflex tuned to 46.0 Hz · F3 67.6 Hz

Predicted SPL response of the Rockville RVP12W8 in the recommended 47.0 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Rockville RVP12W8 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the RVP12W8 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the RVP12W8 in the same box

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 47.0 Liters
Tuning Frequency (Fb) 46.0 Hz
F3 (-3 dB Cutoff) 67.6 Hz
F6 / F10 Extension 57.6 Hz / 45.3 Hz
Port Inner Diameter Ø 10.0 cm
Port Physical Length 16.5 cm
First Pipe Resonance 1041.0 Hz
Estimated MOL @ F3 119.9 dB SPL
Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 0.897 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 1.269; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb) 58.8 Liters
System Q (Qtc) 1.269 (above Butterworth: Qtc cannot fall below Qts (0.90))
System Resonance (Fc) 76.6 Hz
F3 (-3 dB Cutoff) 61.7 Hz
F6 / F10 Extension 52.5 Hz / 43.0 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 54.2 Hz
Total Q (Qts) 0.897
Electrical Q (Qes) 1.059
Mechanical Q (Qms) 5.85
Equivalent Volume (Vas) 58.8 Liters
Diaphragm Area (Sd) 530.9 cm²
DC Resistance (Re) 6.8 Ω
Efficiency Bandwidth Product (EBP) 51.1
Linear Excursion (Xmax) 6.0 mm
Thermal Power (Pe) N/A W
Nominal Diameter 12.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Rockville RVP12W8?

Load Forge's calculated alignment puts Rockville RVP12W8 in a 47.0 liter vented enclosure tuned to 46.0 Hz, reaching an F3 cutoff of approximately 67.6 Hz.

Can Rockville RVP12W8 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 58.8 liters with a Qtc of 1.269 (above Butterworth: Qtc cannot fall below Qts (0.90)), the system exhibits an F3 of 61.7 Hz.

What port dimensions should be used for Rockville RVP12W8 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 10.0 cm with a length of 16.5 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Rockville RVP12W8 Enclosure Card
Download SVG Card 📥

Not sure if RVP12W8 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space