Vented Specialist

Unknown DA25BG08-06

Best box: 0.012 L sealed · Fc 1004.1 Hz · F3 999.9 Hz

Predicted SPL response of the Unknown DA25BG08-06 in the recommended 0.012 L sealed box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Unknown DA25BG08-06 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the DA25BG08-06 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the DA25BG08-06 in the same box

Estimated retail 39.95 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • Limited linear excursion (Xmax: 1.13 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.

Textbook Bass Reflex — not recommended (12.1 dB bass hump)

PORT BUILDABLE
Net Box Volume (Vb) 1.5 Liters
Tuning Frequency (Fb) 546.6 Hz
F3 (-3 dB Cutoff) 518.9 Hz
F6 / F10 Extension 500.1 Hz / 474.5 Hz
Port Inner Diameter Ø 20.0 cm
Port Physical Length 6.7 cm
First Pipe Resonance 2562.0 Hz
Estimated MOL @ F3 104.1 dB SPL
Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 0.51 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.721; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb) 0.012 Liters
System Q (Qtc) 0.721 (Butterworth)
System Resonance (Fc) 1004.1 Hz
F3 (-3 dB Cutoff) 999.9 Hz
F6 / F10 Extension 752.7 Hz / 567.1 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 710.0 Hz
Total Q (Qts) 0.51
Electrical Q (Qes) 0.715
Mechanical Q (Qms) 1.78
Equivalent Volume (Vas) 0.0 Liters
Diaphragm Area (Sd) 6.6 cm²
DC Resistance (Re) 5.2 Ω
Efficiency Bandwidth Product (EBP) 993.3
Linear Excursion (Xmax) 1.1 mm
Thermal Power (Pe) 15.0 W
Nominal Diameter 1.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Unknown DA25BG08-06?

A simple ported box is not recommended for Unknown DA25BG08-06: the textbook alignment (1.5 liters tuned to 546.6 Hz) needs a 6.7 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.

Can Unknown DA25BG08-06 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 0.012 liters with a Qtc of 0.721 (Butterworth), the system exhibits an F3 of 999.9 Hz.

What port dimensions should be used for Unknown DA25BG08-06 to avoid port chuffing?

A straight 20.0 cm port would need 6.7 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Unknown DA25BG08-06 Enclosure Card
Download SVG Card 📥

Not sure if DA25BG08-06 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space