Vented Specialist

Audio System CO-06-EVO

Best box: 7.9 L bass reflex tuned to 52.8 Hz · F3 49.3 Hz

Predicted SPL response of the Audio System CO-06-EVO in the recommended 7.9 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Audio System CO-06-EVO against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the CO-06-EVO and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the CO-06-EVO in the same box

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • The textbook alignment (7.9 L at 50.3 Hz) would need a 49.6 cm port; the recommendation is retuned to 7.9 L at 52.8 Hz so the port can be built.
  • Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 7.9 Liters
Tuning Frequency (Fb) 52.8 Hz
F3 (-3 dB Cutoff) 49.3 Hz
F6 / F10 Extension 44.3 Hz / 39.4 Hz
Port Inner Diameter ESTIMATED Ø 6.8 cm
Port Physical Length 44.6 cm
First Pipe Resonance 386.0 Hz
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 3.5 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 91.3 Hz
F3 (-3 dB Cutoff) 92.2 Hz
F6 / F10 Extension 70.0 Hz / 52.9 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 54.9 Hz
Total Q (Qts) 0.42
Electrical Q (Qes) 0.471
Mechanical Q (Qms) 3.9
Equivalent Volume (Vas) 6.4 Liters
Diaphragm Area (Sd) 129.0 cm²
DC Resistance (Re) 3.2 Ω
Efficiency Bandwidth Product (EBP) 116.6
Linear Excursion (Xmax) N/A mm
Thermal Power (Pe) N/A W
Nominal Diameter 6.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Audio System CO-06-EVO?

Load Forge's calculated alignment puts Audio System CO-06-EVO in a 7.9 liter vented enclosure tuned to 52.8 Hz, reaching an F3 cutoff of approximately 49.3 Hz.

Can Audio System CO-06-EVO be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 3.5 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 92.2 Hz.

What port dimensions should be used for Audio System CO-06-EVO to avoid port chuffing?

Xmax is not published for Audio System CO-06-EVO, so the port is an empirical estimate: a 6.8 cm diameter with a length of 44.6 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Audio System CO-06-EVO Enclosure Card
Download SVG Card 📥

Not sure if CO-06-EVO fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space