What is the recommended ported (bass reflex) box volume for Beyma LOUDSPEAKER 10"WRS 300 8 OH?

According to electroacoustic alignment calculations, Beyma LOUDSPEAKER 10"WRS 300 8 OH performs optimally in a 39.2 liter vented enclosure tuned to 52.2 Hz, reaching an F3 cutoff of approximately 51.3 Hz.

Can Beyma LOUDSPEAKER 10"WRS 300 8 OH be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 17.1 liters with a Qtc of 0.707, the system exhibits an F3 of 90.4 Hz with tight transient response and natural roll-off.

What port dimensions should be used for Beyma LOUDSPEAKER 10"WRS 300 8 OH to avoid port chuffing?

To keep vent air velocity below turbulence limits at rated power, a minimum port diameter of 7.5 cm with a length of 7.0 cm is recommended.

Reflex Optimized

Beyma LOUDSPEAKER 10"WRS 300 8 OH

Complete Thiele/Small parameters, optimized ported (bass reflex) and sealed enclosure designs, F3/F6/F10 cutoffs, and vent turbulence analysis calculated by Load Forge.

Estimated Retail

112.95 EUR

Check Price & Availability ↗ Open in Load Forge Simulator ↗

Recommended Bass Reflex (Vented)

OPTIMIZED EXTENSION

Net Box Volume (Vb)	39.2 Liters
Tuning Frequency (Fb)	52.2 Hz
F3 (-3 dB Cutoff)	51.3 Hz
F6 / F10 Extension	46.7 Hz / 41.7 Hz
Port Inner Diameter	Ø 7.5 cm
Port Physical Length	7.0 cm
First Pipe Resonance	2445.0 Hz
Estimated MOL @ F3	115.0 dB SPL

Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING

Net Box Volume (Vb)	17.1 Liters
System Q (Qtc)	0.707 (Butterworth Q=0.707)
System Resonance (Fc)	92.9 Hz
F3 (-3 dB Cutoff)	90.4 Hz
F6 / F10 Extension	64.4 Hz / 46.5 Hz
Air Spring Linearity	High (Zero port compression)

Simulate This Sealed Box in App →

Verified Thiele/Small Parameters

Resonance (Fs)	52.0 Hz
Total Q (Qts)	0.38
Electrical Q (Qes)	0.408
Mechanical Q (Qms)	5.5

Equivalent Volume (Vas)	42.0 Liters
Diaphragm Area (Sd)	350.0 cm²
DC Resistance (Re)	6.1 Ω
Efficiency Bandwidth Product (EBP)	127.4

Linear Excursion (Xmax)	6.0 mm
Thermal Power (Pe)	300.0 W
Nominal Diameter	10.0"
Catalog Source	Manufacturer Official Datasheet

Shareable Acoustic Card for Forums & Social Media

Embed this verified design card on DIYAudio, AVSForum, Reddit, or Facebook. Includes verified F3, MOL, and box parameters.

Beyma LOUDSPEAKER 10"WRS 300 8 OH Enclosure Card

Copy Forum BBCode (DIYAudio / AVSForum)

[url=https://loadforge.io/drivers/beyma-loudspeaker-10inwrs-300-8-oh][img]https://loadforge.io/api/v1/card/beyma-loudspeaker-10inwrs-300-8-oh.svg[/img][/url]
[b]Beyma LOUDSPEAKER 10"WRS 300 8 OH[/b] — 39.2L Bass Reflex tuned to 52.2Hz (F3: 51.3Hz). Designed with [url=https://loadforge.io]Load Forge[/url].

Download SVG Card 📥

Not sure if LOUDSPEAKER 10"WRS 300 8 OH fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 9,000+ verified manufacturer drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space ⚡