Sealed Specialist

Ciare CZ170 (4Ω)

Best box: 6.6 L bass reflex tuned to 88.4 Hz · F3 138.9 Hz

Predicted SPL response of the Ciare CZ170 (4Ω) in the recommended 6.6 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Ciare CZ170 (4Ω) against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the CZ170 (4Ω) and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the CZ170 (4Ω) in the same box

Estimated retail 27.00 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • Limited linear excursion (Xmax: 2.1 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 6.6 Liters
Tuning Frequency (Fb) 88.4 Hz
F3 (-3 dB Cutoff) 138.9 Hz
F6 / F10 Extension 123.9 Hz / 104.2 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 7.8 cm
First Pipe Resonance 2195.0 Hz
Estimated MOL @ F3 110.2 dB SPL
Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 1.47 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 2.079; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb) 8.2 Liters
System Q (Qtc) 2.079 (above Butterworth: Qtc cannot fall below Qts (1.47))
System Resonance (Fc) 147.1 Hz
F3 (-3 dB Cutoff) 119.8 Hz
F6 / F10 Extension 106.5 Hz / 91.1 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 104.0 Hz
Total Q (Qts) 1.47
Electrical Q (Qes) 2.163
Mechanical Q (Qms) 4.59
Equivalent Volume (Vas) 8.2 Liters
Diaphragm Area (Sd) 133.0 cm²
DC Resistance (Re) 3.5 Ω
Efficiency Bandwidth Product (EBP) 48.1
Linear Excursion (Xmax) 2.1 mm
Thermal Power (Pe) 50.0 W
Nominal Diameter 6.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Ciare CZ170 (4Ω)?

Load Forge's calculated alignment puts Ciare CZ170 (4Ω) in a 6.6 liter vented enclosure tuned to 88.4 Hz, reaching an F3 cutoff of approximately 138.9 Hz.

Can Ciare CZ170 (4Ω) be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 8.2 liters with a Qtc of 2.079 (above Butterworth: Qtc cannot fall below Qts (1.47)), the system exhibits an F3 of 119.8 Hz.

What port dimensions should be used for Ciare CZ170 (4Ω) to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 7.8 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Ciare CZ170 (4Ω) Enclosure Card
Download SVG Card 📥

Not sure if CZ170 (4Ω) fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space