DB Drive WDX12G3.4
Best box: 90.2 L bass reflex tuned to 26.9 Hz · F3 37.1 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the DB Drive WDX12G3.4 against your space and targets — instant, no sign-up.
Estimated retail 399.98 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 12.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the DB Drive WDX12G3.4 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 90.2 Liters |
| Tuning Frequency (Fb) | 26.9 Hz |
| F3 (-3 dB Cutoff) | 37.1 Hz |
| F6 / F10 Extension | 30.2 Hz / 23.2 Hz |
| Port Inner Diameter | Ø 10.0 cm |
| Port Physical Length | 28.9 cm |
| First Pipe Resonance | 595.0 Hz |
| Estimated MOL @ F3 | 118.5 dB SPL |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.62 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.877; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 112.7 Liters |
| System Q (Qtc) | 0.877 (above Butterworth) |
| System Resonance (Fc) | 44.7 Hz |
| F3 (-3 dB Cutoff) | 38.5 Hz |
| F6 / F10 Extension | 31.0 Hz / 24.3 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 31.6 Hz |
| Total Q (Qts) | 0.62 |
| Electrical Q (Qes) | 0.72 |
| Mechanical Q (Qms) | 4.48 |
| Equivalent Volume (Vas) | 112.7 Liters |
| Diaphragm Area (Sd) | 530.0 cm² |
| DC Resistance (Re) | 2.0 Ω |
| Efficiency Bandwidth Product (EBP) | 43.9 |
| Linear Excursion (Xmax) | 15.0 mm |
| Thermal Power (Pe) | 3000.0 W |
| Nominal Diameter | 12.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for DB Drive WDX12G3.4?
Load Forge's calculated alignment puts DB Drive WDX12G3.4 in a 90.2 liter vented enclosure tuned to 26.9 Hz, reaching an F3 cutoff of approximately 37.1 Hz.
Can DB Drive WDX12G3.4 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 112.7 liters with a Qtc of 0.877 (above Butterworth), the system exhibits an F3 of 38.5 Hz.
What port dimensions should be used for DB Drive WDX12G3.4 to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 10.0 cm with a length of 28.9 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if WDX12G3.4 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space