Sealed Specialist

DB Drive WDX15G2R.4

Best box: 52.5 L bass reflex tuned to 30.5 Hz · F3 36.5 Hz

Predicted SPL response of the DB Drive WDX15G2R.4 in the recommended 52.5 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the DB Drive WDX15G2R.4 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the WDX15G2R.4 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the WDX15G2R.4 in the same box

Estimated retail 399.98 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • The textbook alignment (52.5 L at 26.5 Hz) would need a 132.9 cm port; the recommendation is retuned to 52.5 L at 30.5 Hz so the port can be built.
  • Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
  • Port length (97.7 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.

Recommended Bass Reflex (Vented)

PORT NEEDS ELBOW / 3D
Net Box Volume (Vb) 52.5 Liters
Tuning Frequency (Fb) 30.5 Hz
F3 (-3 dB Cutoff) 36.5 Hz
F6 / F10 Extension 30.1 Hz / 24.5 Hz
Port Inner Diameter ESTIMATED Ø 15.0 cm
Port Physical Length 97.7 cm
First Pipe Resonance 176.0 Hz
Estimated MOL @ F3 116.7 dB SPL
⚠️ Port feasibility: a straight 15.0 cm tube needs 97.7 cm of internal length. Use an elbow bend, a slotted vent or a 3D folded duct.
Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 0.967 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 1.368; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb) 65.6 Liters
System Q (Qtc) 1.368 (above Butterworth: Qtc cannot fall below Qts (0.97))
System Resonance (Fc) 44.1 Hz
F3 (-3 dB Cutoff) 40.7 Hz
F6 / F10 Extension 31.9 Hz / 24.6 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 31.2 Hz
Total Q (Qts) 0.967
Electrical Q (Qes) 1.321
Mechanical Q (Qms) 3.61
Equivalent Volume (Vas) 65.6 Liters
Diaphragm Area (Sd) 811.2 cm²
DC Resistance (Re) 3.2 Ω
Efficiency Bandwidth Product (EBP) 23.6
Linear Excursion (Xmax) N/A mm
Thermal Power (Pe) 1250.0 W
Nominal Diameter 15.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for DB Drive WDX15G2R.4?

Load Forge's calculated alignment puts DB Drive WDX15G2R.4 in a 52.5 liter vented enclosure tuned to 30.5 Hz, reaching an F3 cutoff of approximately 36.5 Hz.

Can DB Drive WDX15G2R.4 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 65.6 liters with a Qtc of 1.368 (above Butterworth: Qtc cannot fall below Qts (0.97)), the system exhibits an F3 of 40.7 Hz.

What port dimensions should be used for DB Drive WDX15G2R.4 to avoid port chuffing?

Xmax is not published for DB Drive WDX15G2R.4, so the port is an empirical estimate: a 15.0 cm diameter with a length of 97.7 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

DB Drive WDX15G2R.4 Enclosure Card
Download SVG Card 📥

Not sure if WDX15G2R.4 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space