Vented Specialist

Eighteen Sound 12ND940

Best box: 9.6 L bass reflex tuned to 100.7 Hz · F3 109.1 Hz

Predicted SPL response of the Eighteen Sound 12ND940 in the recommended 9.6 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Eighteen Sound 12ND940 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the 12ND940 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the 12ND940 in the same box

Estimated retail 209.77 GBP · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • The textbook alignment (9.6 L at 87.6 Hz) would need a 61.2 cm port; the recommendation is retuned to 9.6 L at 100.7 Hz so the port can be built.

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 9.6 Liters
Tuning Frequency (Fb) 100.7 Hz
F3 (-3 dB Cutoff) 109.1 Hz
F6 / F10 Extension 95.6 Hz / 82.6 Hz
Port Inner Diameter Ø 15.0 cm
Port Physical Length 43.7 cm
First Pipe Resonance 394.0 Hz
Estimated MOL @ F3 121.6 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 5.6 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 165.6 Hz
F3 (-3 dB Cutoff) 139.6 Hz
F6 / F10 Extension 110.0 Hz / 84.2 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 49.0 Hz
Total Q (Qts) 0.2
Electrical Q (Qes) 0.207
Mechanical Q (Qms) 5.6
Equivalent Volume (Vas) 64.8 Liters
Diaphragm Area (Sd) 531.0 cm²
DC Resistance (Re) 5.0 Ω
Efficiency Bandwidth Product (EBP) 236.2
Linear Excursion (Xmax) 7.6 mm
Thermal Power (Pe) 600.0 W
Nominal Diameter 12.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Eighteen Sound 12ND940?

Load Forge's calculated alignment puts Eighteen Sound 12ND940 in a 9.6 liter vented enclosure tuned to 100.7 Hz, reaching an F3 cutoff of approximately 109.1 Hz.

Can Eighteen Sound 12ND940 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 5.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 139.6 Hz.

What port dimensions should be used for Eighteen Sound 12ND940 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 15.0 cm with a length of 43.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Eighteen Sound 12ND940 Enclosure Card
Download SVG Card 📥

Not sure if 12ND940 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space