Versatile Load

Eminence Alpha-10A 10" Guitar/PA Driver

Best box: 123.2 L bass reflex tuned to 35.0 Hz · F3 40.2 Hz

Predicted SPL response of the Eminence Alpha-10A 10" Guitar/PA Driver in the recommended 123.2 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Eminence Alpha-10A 10" Guitar/PA Driver against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the Alpha-10A 10" Guitar/PA Driver and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the Alpha-10A 10" Guitar/PA Driver in the same box

Estimated retail 104.49 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • Large enclosure volume (123.2 L) requires extensive internal matrix bracing to prevent panel resonance.
  • Limited linear excursion (Xmax: 3.2 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 123.2 Liters
Tuning Frequency (Fb) 35.0 Hz
F3 (-3 dB Cutoff) 40.2 Hz
F6 / F10 Extension 30.8 Hz / 26.5 Hz
Port Inner Diameter Ø 6.8 cm
Port Physical Length 2.4 cm
First Pipe Resonance 7316.0 Hz
Estimated MOL @ F3 108.2 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 188.4 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 55.8 Hz
F3 (-3 dB Cutoff) 57.2 Hz
F6 / F10 Extension 43.0 Hz / 32.4 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 50.0 Hz
Total Q (Qts) 0.59
Electrical Q (Qes) 0.665
Mechanical Q (Qms) 5.21
Equivalent Volume (Vas) 82.1 Liters
Diaphragm Area (Sd) 355.4 cm²
DC Resistance (Re) 5.31 Ω
Efficiency Bandwidth Product (EBP) 75.1
Linear Excursion (Xmax) 3.2 mm
Thermal Power (Pe) 150.0 W
Nominal Diameter 10.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Eminence Alpha-10A 10" Guitar/PA Driver?

Load Forge's calculated alignment puts Eminence Alpha-10A 10" Guitar/PA Driver in a 123.2 liter vented enclosure tuned to 35.0 Hz, reaching an F3 cutoff of approximately 40.2 Hz.

Can Eminence Alpha-10A 10" Guitar/PA Driver be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 188.4 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 57.2 Hz.

What port dimensions should be used for Eminence Alpha-10A 10" Guitar/PA Driver to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 6.8 cm with a length of 2.4 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Eminence Alpha-10A 10" Guitar/PA Driver Enclosure Card
Download SVG Card 📥

Not sure if Alpha-10A 10" Guitar/PA Driver fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space