Eros E-510 Pro
Best box: 82.5 L bass reflex tuned to 29.4 Hz · F3 36.9 Hz
Will it fit your requirements?
Check the Eros E-510 Pro against your space and targets — instant, no sign-up.
Estimated retail 2500.00 BRL · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 10.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Eros E-510 Pro does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 82.5 Liters |
| Tuning Frequency (Fb) | 29.4 Hz |
| F3 (-3 dB Cutoff) | 36.9 Hz |
| F6 / F10 Extension | 26.8 Hz / 22.4 Hz |
| Port Inner Diameter | Ø 6.8 cm |
| Port Physical Length | 10.4 cm |
| First Pipe Resonance | 1653.0 Hz |
| Estimated MOL @ F3 | 112.4 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 141.6 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 47.7 Hz |
| F3 (-3 dB Cutoff) | 48.3 Hz |
| F6 / F10 Extension | 36.6 Hz / 27.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 42.0 Hz |
| Total Q (Qts) | 0.6 |
| Electrical Q (Qes) | 0.656 |
| Mechanical Q (Qms) | 7.0 |
| Equivalent Volume (Vas) | 55.0 Liters |
| Diaphragm Area (Sd) | 350.0 cm² |
| DC Resistance (Re) | 3.5 Ω |
| Efficiency Bandwidth Product (EBP) | 64.0 |
| Linear Excursion (Xmax) | 9.0 mm |
| Thermal Power (Pe) | 5100.0 W |
| Nominal Diameter | 10.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Eros E-510 Pro?
Load Forge's calculated alignment puts Eros E-510 Pro in a 82.5 liter vented enclosure tuned to 29.4 Hz, reaching an F3 cutoff of approximately 36.9 Hz.
Can Eros E-510 Pro be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 141.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 48.3 Hz.
What port dimensions should be used for Eros E-510 Pro to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 6.8 cm with a length of 10.4 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if E-510 Pro fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space