Vented Specialist

FaitalPRO 6FE200 (16Ω)

Best box: 3.4 L bass reflex tuned to 102.0 Hz · F3 142.0 Hz

Will it fit your requirements?

Check the FaitalPRO 6FE200 (16Ω) against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the 6FE200 (16Ω) and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the 6FE200 (16Ω) in the same box

Estimated retail 37.79 GBP · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Comparable 6.0" Drivers

Drivers with similar piston area, resonance and Qts — useful alternatives when the FaitalPRO 6FE200 (16Ω) does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.

FaitalPRO

6FE200-8F

6.0" · Fs 120.0 Hz · Qts 0.669 · Vas 3.6 L

FaitalPRO

6FE200 6" Professional Woofer 4 Ohm

6.0" · Fs 120.0 Hz · Qts 0.71 · Vas 3.7 L

FaitalPRO

6FE200 6" Professional Woofer 8 Ohm

6.0" · Fs 120.0 Hz · Qts 0.67 · Vas 3.1 L

SICA

6 M 1,5 CS - 8

6.0" · Fs 118.0 Hz · Qts 0.56 · Vas 4.7 L

B2 Audio

35243

6.0" · Fs 115.0 Hz · Qts 0.6 · Vas 3.6 L

SICA

6 D 1.5 CS

6.0" · Fs 108.5 Hz · Qts 0.63 · Vas 4.4 L

Compare them in the same box → Browse all 6.0" drivers → All FaitalPRO drivers →

Recommended Bass Reflex (Vented)

PORT BUILDABLE

Net Box Volume (Vb)	3.4 Liters
Tuning Frequency (Fb)	102.0 Hz
F3 (-3 dB Cutoff)	142.0 Hz
F6 / F10 Extension	116.1 Hz / 88.9 Hz
Port Inner Diameter	Ø 6.8 cm
Port Physical Length	25.9 cm
First Pipe Resonance	664.0 Hz
Estimated MOL @ F3	112.5 dB SPL

Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 0.66 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.933; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb)	4.2 Liters
System Q (Qtc)	0.933 (above Butterworth)
System Resonance (Fc)	169.7 Hz
F3 (-3 dB Cutoff)	144.4 Hz
F6 / F10 Extension	117.2 Hz / 92.7 Hz
Air Spring Linearity	High (Zero port compression)

Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs)	120.0 Hz
Total Q (Qts)	0.66
Electrical Q (Qes)	0.703
Mechanical Q (Qms)	10.8

Equivalent Volume (Vas)	4.2 Liters
Diaphragm Area (Sd)	131.0 cm²
DC Resistance (Re)	12.0 Ω
Efficiency Bandwidth Product (EBP)	170.7

Linear Excursion (Xmax)	4.2 mm
Thermal Power (Pe)	130.0 W
Nominal Diameter	6.0"
Catalog Source	Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for FaitalPRO 6FE200 (16Ω)?

Load Forge's calculated alignment puts FaitalPRO 6FE200 (16Ω) in a 3.4 liter vented enclosure tuned to 102.0 Hz, reaching an F3 cutoff of approximately 142.0 Hz.

Can FaitalPRO 6FE200 (16Ω) be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 4.2 liters with a Qtc of 0.933 (above Butterworth), the system exhibits an F3 of 144.4 Hz.

What port dimensions should be used for FaitalPRO 6FE200 (16Ω) to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 6.8 cm with a length of 25.9 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Not sure if 6FE200 (16Ω) fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space