Sealed Specialist

Hinor HSW12STYLO

Best box: 105.7 L sealed · Fc 46.6 Hz · F3 37.8 Hz

Will it fit your requirements?

Check the Hinor HSW12STYLO against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the HSW12STYLO and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the HSW12STYLO in the same box

Free, no sign-up to simulate · a free account saves your design

Comparable 12.0" Drivers

Drivers with similar piston area, resonance and Qts — useful alternatives when the Hinor HSW12STYLO does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.

Hinor

12 CITY

12.0" · Fs 33.0 Hz · Qts 1.04 · Vas 105.7 L

Hinor

HSW12CARBONO

12.0" · Fs 38.2 Hz · Qts 0.84 · Vas 50.1 L

Hinor

HSW12CARBONOD4

12.0" · Fs 41.2 Hz · Qts 0.96 · Vas 40.8 L

Goldwood

GW-1248 12" Butyl Surround Woofer 8 Ohm

12.0" · Fs 33.3 Hz · Qts 1.0 · Vas 103.6 L

GRS

292-422

12.0" · Fs 30.0 Hz · Qts 1.06 · Vas 112.7 L

Bomber

SUBWOOFER 12″ CARBON 500 WRMS 4+4 OHMS

12.0" · Fs 34.0 Hz · Qts 1.0 · Vas 60.0 L

Compare them in the same box → Browse all 12.0" drivers → All Hinor drivers →

⚠️ Engineering Notice for Builders

Limited linear excursion (Xmax: 2.6 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.

Textbook Bass Reflex — not recommended (4.9 dB bass hump)

PORT BUILDABLE

Net Box Volume (Vb)	84.6 Liters
Tuning Frequency (Fb)	28.0 Hz
F3 (-3 dB Cutoff)	42.4 Hz
F6 / F10 Extension	36.6 Hz / 29.5 Hz
Port Inner Diameter	Ø 5.0 cm
Port Physical Length	5.3 cm
First Pipe Resonance	3246.0 Hz
Estimated MOL @ F3	103.9 dB SPL

Simulate This Reflex Box in App →

Sealed (Acoustic Suspension) — compromise

SUITS INFINITE / OPEN BAFFLE

With Qts 1.04 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 1.471; for a flat response this driver is better used on an infinite (IB) or open baffle.

Net Box Volume (Vb)	105.7 Liters
System Q (Qtc)	1.471 (above Butterworth: Qtc cannot fall below Qts (1.04))
System Resonance (Fc)	46.6 Hz
F3 (-3 dB Cutoff)	37.8 Hz
F6 / F10 Extension	32.5 Hz / 27.0 Hz
Air Spring Linearity	High (Zero port compression)

Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs)	33.0 Hz
Total Q (Qts)	1.04
Electrical Q (Qes)	1.481
Mechanical Q (Qms)	3.49

Equivalent Volume (Vas)	105.7 Liters
Diaphragm Area (Sd)	518.4 cm²
DC Resistance (Re)	3.4 Ω
Efficiency Bandwidth Product (EBP)	22.3

Linear Excursion (Xmax)	2.6 mm
Thermal Power (Pe)	N/A W
Nominal Diameter	12.0"
Catalog Source	Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Hinor HSW12STYLO?

A simple ported box is not recommended for Hinor HSW12STYLO: the textbook alignment (84.6 liters tuned to 28.0 Hz) needs a 5.3 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.

Can Hinor HSW12STYLO be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 105.7 liters with a Qtc of 1.471 (above Butterworth: Qtc cannot fall below Qts (1.04)), the system exhibits an F3 of 37.8 Hz.

What port dimensions should be used for Hinor HSW12STYLO to avoid port chuffing?

A straight 5.0 cm port would need 5.3 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Not sure if HSW12STYLO fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space