Kicker 52CVR152
Best box: 182.0 L bass reflex tuned to 26.4 Hz · F3 23.9 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the Kicker 52CVR152 against your space and targets — instant, no sign-up.
Estimated retail 229.99 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the Kicker 52CVR152 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- The textbook alignment (182.0 L at 22.0 Hz) would need a 151.7 cm port; the recommendation is retuned to 182.0 L at 26.4 Hz so the port can be built.
- Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
- Port length (99.8 cm) exceeds a straight internal run; use an elbow bend, slotted vent or 3D folded duct to fit the enclosure.
- Large enclosure volume (182.0 L) requires extensive internal matrix bracing to prevent panel resonance.
Recommended Bass Reflex (Vented)
PORT NEEDS ELBOW / 3D| Net Box Volume (Vb) | 182.0 Liters |
| Tuning Frequency (Fb) | 26.4 Hz |
| F3 (-3 dB Cutoff) | 23.9 Hz |
| F6 / F10 Extension | 21.8 Hz / 19.6 Hz |
| Port Inner Diameter ESTIMATED | Ø 25.2 cm |
| Port Physical Length | 99.8 cm |
| First Pipe Resonance | 172.0 Hz |
| Estimated MOL @ F3 | 118.0 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 86.5 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 39.2 Hz |
| F3 (-3 dB Cutoff) | 42.6 Hz |
| F6 / F10 Extension | 31.7 Hz / 23.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 25.6 Hz |
| Total Q (Qts) | 0.452 |
| Electrical Q (Qes) | 0.477 |
| Mechanical Q (Qms) | 8.74 |
| Equivalent Volume (Vas) | 125.1 Liters |
| Diaphragm Area (Sd) | 839.8 cm² |
| DC Resistance (Re) | 3.75 Ω |
| Efficiency Bandwidth Product (EBP) | 53.7 |
| Linear Excursion (Xmax) | N/A mm |
| Thermal Power (Pe) | 1400.0 W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for Kicker 52CVR152?
Load Forge's calculated alignment puts Kicker 52CVR152 in a 182.0 liter vented enclosure tuned to 26.4 Hz, reaching an F3 cutoff of approximately 23.9 Hz.
Can Kicker 52CVR152 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 86.5 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 42.6 Hz.
What port dimensions should be used for Kicker 52CVR152 to avoid port chuffing?
Xmax is not published for Kicker 52CVR152, so the port is an empirical estimate: a 25.2 cm diameter with a length of 99.8 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 52CVR152 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space