PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm
Best box: 8.2 L sealed · Fc 68.6 Hz · F3 58.9 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm against your space and targets — instant, no sign-up.
Estimated retail 169.91 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 10.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Straight vent would be 319.4 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 6.6 Liters |
| Tuning Frequency (Fb) | 41.2 Hz |
| F3 (-3 dB Cutoff) | 59.7 Hz |
| F6 / F10 Extension | 49.2 Hz / 37.5 Hz |
| Port Inner Diameter | Ø 12.5 cm |
| Port Physical Length | 319.4 cm |
| First Pipe Resonance | 54.0 Hz |
| Estimated MOL @ F3 | 112.8 dB SPL |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.69 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.976; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 8.2 Liters |
| System Q (Qtc) | 0.976 (above Butterworth) |
| System Resonance (Fc) | 68.6 Hz |
| F3 (-3 dB Cutoff) | 58.9 Hz |
| F6 / F10 Extension | 48.3 Hz / 38.5 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 48.5 Hz |
| Total Q (Qts) | 0.69 |
| Electrical Q (Qes) | 0.741 |
| Mechanical Q (Qms) | 10.0 |
| Equivalent Volume (Vas) | 8.2 Liters |
| Diaphragm Area (Sd) | 330.0 cm² |
| DC Resistance (Re) | 1.7 Ω |
| Efficiency Bandwidth Product (EBP) | 65.4 |
| Linear Excursion (Xmax) | 17.5 mm |
| Thermal Power (Pe) | 1000.0 W |
| Nominal Diameter | 10.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm?
A simple ported box is not recommended for PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm: the textbook alignment (6.6 liters tuned to 41.2 Hz) needs a 319.4 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 8.2 liters with a Qtc of 0.976 (above Butterworth), the system exhibits an F3 of 58.9 Hz.
What port dimensions should be used for PRV Audio RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm to avoid port chuffing?
A straight 12.5 cm port would need 319.4 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if RS10-SUBD4 RS Series 10" Subwoofer DVC 4x4 Ohm fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space