Vented Specialist

PURIFI PTT6.5W04-NFA-01

Best box: 11.1 L bass reflex tuned to 40.9 Hz · F3 45.4 Hz

Predicted SPL response of the PURIFI PTT6.5W04-NFA-01 in the recommended 11.1 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the PURIFI PTT6.5W04-NFA-01 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the PTT6.5W04-NFA-01 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the PTT6.5W04-NFA-01 in the same box

Estimated retail 429.00 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 11.1 Liters
Tuning Frequency (Fb) 40.9 Hz
F3 (-3 dB Cutoff) 45.4 Hz
F6 / F10 Extension 38.8 Hz / 33.3 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 28.1 cm
First Pipe Resonance 612.0 Hz
Estimated MOL @ F3 107.0 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 5.3 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 77.0 Hz
F3 (-3 dB Cutoff) 78.5 Hz
F6 / F10 Extension 59.2 Hz / 44.6 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 31.0 Hz
Total Q (Qts) 0.28
Electrical Q (Qes) 0.299
Mechanical Q (Qms) 4.5
Equivalent Volume (Vas) 28.5 Liters
Diaphragm Area (Sd) 133.0 cm²
DC Resistance (Re) 3.6 Ω
Efficiency Bandwidth Product (EBP) 103.8
Linear Excursion (Xmax) 9.8 mm
Thermal Power (Pe) 250.0 W
Nominal Diameter 6.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for PURIFI PTT6.5W04-NFA-01?

Load Forge's calculated alignment puts PURIFI PTT6.5W04-NFA-01 in a 11.1 liter vented enclosure tuned to 40.9 Hz, reaching an F3 cutoff of approximately 45.4 Hz.

Can PURIFI PTT6.5W04-NFA-01 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 5.3 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 78.5 Hz.

What port dimensions should be used for PURIFI PTT6.5W04-NFA-01 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 28.1 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

PURIFI PTT6.5W04-NFA-01 Enclosure Card
Download SVG Card 📥

Not sure if PTT6.5W04-NFA-01 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space