Versatile Load

PURIFI PTT6.5X08-NAA-07

Best box: 21.6 L bass reflex tuned to 32.6 Hz · F3 31.4 Hz

Predicted SPL response of the PURIFI PTT6.5X08-NAA-07 in the recommended 21.6 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the PURIFI PTT6.5X08-NAA-07 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the PTT6.5X08-NAA-07 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the PTT6.5X08-NAA-07 in the same box

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 21.6 Liters
Tuning Frequency (Fb) 32.6 Hz
F3 (-3 dB Cutoff) 31.4 Hz
F6 / F10 Extension 27.9 Hz / 24.7 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 22.1 cm
First Pipe Resonance 780.0 Hz
Estimated MOL @ F3 105.3 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 9.4 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 59.3 Hz
F3 (-3 dB Cutoff) 60.5 Hz
F6 / F10 Extension 45.5 Hz / 34.3 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 34.0 Hz
Total Q (Qts) 0.4
Electrical Q (Qes) 0.422
Mechanical Q (Qms) 7.7
Equivalent Volume (Vas) 20.0 Liters
Diaphragm Area (Sd) 133.0 cm²
DC Resistance (Re) 5.9 Ω
Efficiency Bandwidth Product (EBP) 80.6
Linear Excursion (Xmax) 9.8 mm
Thermal Power (Pe) 250.0 W
Nominal Diameter 6.5"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for PURIFI PTT6.5X08-NAA-07?

Load Forge's calculated alignment puts PURIFI PTT6.5X08-NAA-07 in a 21.6 liter vented enclosure tuned to 32.6 Hz, reaching an F3 cutoff of approximately 31.4 Hz.

Can PURIFI PTT6.5X08-NAA-07 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 9.4 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 60.5 Hz.

What port dimensions should be used for PURIFI PTT6.5X08-NAA-07 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 22.1 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

PURIFI PTT6.5X08-NAA-07 Enclosure Card
Download SVG Card 📥

Not sure if PTT6.5X08-NAA-07 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space