Vented Specialist

SICA 12E12.5CS-8

Best box: 77.1 L bass reflex tuned to 41.8 Hz · F3 40.8 Hz

Predicted SPL response of the SICA 12E12.5CS-8 in the recommended 77.1 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the SICA 12E12.5CS-8 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the 12E12.5CS-8 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the 12E12.5CS-8 in the same box

Estimated retail 126.40 EUR · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • Limited linear excursion (Xmax: 2.0 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 77.1 Liters
Tuning Frequency (Fb) 41.8 Hz
F3 (-3 dB Cutoff) 40.8 Hz
F6 / F10 Extension 36.3 Hz / 31.9 Hz
Port Inner Diameter Ø 6.8 cm
Port Physical Length 3.2 cm
First Pipe Resonance 5343.0 Hz
Estimated MOL @ F3 112.2 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 33.8 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 74.4 Hz
F3 (-3 dB Cutoff) 75.8 Hz
F6 / F10 Extension 57.1 Hz / 43.0 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 39.7 Hz
Total Q (Qts) 0.36
Electrical Q (Qes) 0.37
Mechanical Q (Qms) 13.62
Equivalent Volume (Vas) 96.5 Liters
Diaphragm Area (Sd) 490.9 cm²
DC Resistance (Re) 6.0 Ω
Efficiency Bandwidth Product (EBP) 107.4
Linear Excursion (Xmax) 2.0 mm
Thermal Power (Pe) 250.0 W
Nominal Diameter 12.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for SICA 12E12.5CS-8?

Load Forge's calculated alignment puts SICA 12E12.5CS-8 in a 77.1 liter vented enclosure tuned to 41.8 Hz, reaching an F3 cutoff of approximately 40.8 Hz.

Can SICA 12E12.5CS-8 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 33.8 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 75.8 Hz.

What port dimensions should be used for SICA 12E12.5CS-8 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 6.8 cm with a length of 3.2 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

SICA 12E12.5CS-8 Enclosure Card
Download SVG Card 📥

Not sure if 12E12.5CS-8 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space