SICA 4 C 1,5 CP - 8
Best box: 1.5 L bass reflex tuned to 119.5 Hz · F3 111.4 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the SICA 4 C 1,5 CP - 8 against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 4.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the SICA 4 C 1,5 CP - 8 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Limited linear excursion (Xmax: 2.0 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 1.5 Liters |
| Tuning Frequency (Fb) | 119.5 Hz |
| F3 (-3 dB Cutoff) | 111.4 Hz |
| F6 / F10 Extension | 101.8 Hz / 91.3 Hz |
| Port Inner Diameter | Ø 5.0 cm |
| Port Physical Length | 23.9 cm |
| First Pipe Resonance | 720.0 Hz |
| Estimated MOL @ F3 | 105.9 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 0.39 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 221.5 Hz |
| F3 (-3 dB Cutoff) | 224.5 Hz |
| F6 / F10 Extension | 172.4 Hz / 130.9 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 102.0 Hz |
| Total Q (Qts) | 0.32 |
| Electrical Q (Qes) | 0.347 |
| Mechanical Q (Qms) | 4.05 |
| Equivalent Volume (Vas) | 1.5 Liters |
| Diaphragm Area (Sd) | 51.5 cm² |
| DC Resistance (Re) | 5.1 Ω |
| Efficiency Bandwidth Product (EBP) | 293.6 |
| Linear Excursion (Xmax) | 2.0 mm |
| Thermal Power (Pe) | 100.0 W |
| Nominal Diameter | 4.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for SICA 4 C 1,5 CP - 8?
Load Forge's calculated alignment puts SICA 4 C 1,5 CP - 8 in a 1.5 liter vented enclosure tuned to 119.5 Hz, reaching an F3 cutoff of approximately 111.4 Hz.
Can SICA 4 C 1,5 CP - 8 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 0.39 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 224.5 Hz.
What port dimensions should be used for SICA 4 C 1,5 CP - 8 to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 23.9 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 4 C 1,5 CP - 8 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space