SICA BS 15N/350A
Best box: 119.7 L sealed · Fc 64.3 Hz · F3 65.3 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the SICA BS 15N/350A against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 15.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the SICA BS 15N/350A does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Straight vent would be 336.3 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
- Large enclosure volume (244.6 L) requires extensive internal matrix bracing to prevent panel resonance.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 244.6 Liters |
| Tuning Frequency (Fb) | 38.0 Hz |
| F3 (-3 dB Cutoff) | 34.9 Hz |
| F6 / F10 Extension | 31.6 Hz / 28.3 Hz |
| Port Inner Diameter | Ø 76.6 cm |
| Port Physical Length | 336.3 cm |
| First Pipe Resonance | 51.0 Hz |
| Estimated MOL @ F3 | 118.4 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 119.7 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 64.3 Hz |
| F3 (-3 dB Cutoff) | 65.3 Hz |
| F6 / F10 Extension | 49.0 Hz / 36.9 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 45.0 Hz |
| Total Q (Qts) | 0.46 |
| Electrical Q (Qes) | 0.489 |
| Mechanical Q (Qms) | 7.64 |
| Equivalent Volume (Vas) | 163.1 Liters |
| Diaphragm Area (Sd) | 855.3 cm² |
| DC Resistance (Re) | 5.1 Ω |
| Efficiency Bandwidth Product (EBP) | 91.9 |
| Linear Excursion (Xmax) | 388.0 mm |
| Thermal Power (Pe) | 350.0 W |
| Nominal Diameter | 15.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for SICA BS 15N/350A?
A simple ported box is not recommended for SICA BS 15N/350A: the textbook alignment (244.6 liters tuned to 38.0 Hz) needs a 336.3 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can SICA BS 15N/350A be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 119.7 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 65.3 Hz.
What port dimensions should be used for SICA BS 15N/350A to avoid port chuffing?
A straight 76.6 cm port would need 336.3 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if BS 15N/350A fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space