Versatile Load

Skar Audio VVX-15v3 D2

Best box: 111.5 L bass reflex tuned to 24.8 Hz · F3 23.5 Hz

Predicted SPL response of the Skar Audio VVX-15v3 D2 in the recommended 111.5 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Skar Audio VVX-15v3 D2 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the VVX-15v3 D2 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the VVX-15v3 D2 in the same box

Estimated retail 219.99 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 111.5 Liters
Tuning Frequency (Fb) 24.8 Hz
F3 (-3 dB Cutoff) 23.5 Hz
F6 / F10 Extension 21.4 Hz / 19.3 Hz
Port Inner Diameter Ø 12.5 cm
Port Physical Length 44.7 cm
First Pipe Resonance 385.0 Hz
Estimated MOL @ F3 115.9 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 80.6 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 43.9 Hz
F3 (-3 dB Cutoff) 60.0 Hz
F6 / F10 Extension 39.0 Hz / 26.3 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 32.2 Hz
Total Q (Qts) 0.51
Electrical Q (Qes) 0.563
Mechanical Q (Qms) 5.45
Equivalent Volume (Vas) 74.3 Liters
Diaphragm Area (Sd) 695.6 cm²
DC Resistance (Re) 3.8 Ω
Efficiency Bandwidth Product (EBP) 57.2
Linear Excursion (Xmax) 15.5 mm
Thermal Power (Pe) 1200.0 W
Nominal Diameter 15.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Skar Audio VVX-15v3 D2?

Load Forge's calculated alignment puts Skar Audio VVX-15v3 D2 in a 111.5 liter vented enclosure tuned to 24.8 Hz, reaching an F3 cutoff of approximately 23.5 Hz.

Can Skar Audio VVX-15v3 D2 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 80.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 60.0 Hz.

What port dimensions should be used for Skar Audio VVX-15v3 D2 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 12.5 cm with a length of 44.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Skar Audio VVX-15v3 D2 Enclosure Card
Download SVG Card 📥

Not sure if VVX-15v3 D2 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space