Versatile Load

Wavecor SW280WA01_02

Best box: 48.1 L bass reflex tuned to 24.9 Hz · F3 23.8 Hz

Predicted SPL response of the Wavecor SW280WA01_02 in the recommended 48.1 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the Wavecor SW280WA01_02 against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the SW280WA01_02 and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the SW280WA01_02 in the same box

Estimated retail 322.00 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 48.1 Liters
Tuning Frequency (Fb) 24.9 Hz
F3 (-3 dB Cutoff) 23.8 Hz
F6 / F10 Extension 21.2 Hz / 18.8 Hz
Port Inner Diameter Ø 5.0 cm
Port Physical Length 16.2 cm
First Pipe Resonance 1064.0 Hz
Estimated MOL @ F3 108.2 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 21.0 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 45.4 Hz
F3 (-3 dB Cutoff) 47.0 Hz
F6 / F10 Extension 35.1 Hz / 26.4 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 26.6 Hz
Total Q (Qts) 0.41
Electrical Q (Qes) 0.439
Mechanical Q (Qms) 6.2
Equivalent Volume (Vas) 41.4 Liters
Diaphragm Area (Sd) 335.0 cm²
DC Resistance (Re) 3.4 Ω
Efficiency Bandwidth Product (EBP) 60.6
Linear Excursion (Xmax) 6.0 mm
Thermal Power (Pe) N/A W
Nominal Diameter 10.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for Wavecor SW280WA01_02?

Load Forge's calculated alignment puts Wavecor SW280WA01_02 in a 48.1 liter vented enclosure tuned to 24.9 Hz, reaching an F3 cutoff of approximately 23.8 Hz.

Can Wavecor SW280WA01_02 be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 21.0 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 47.0 Hz.

What port dimensions should be used for Wavecor SW280WA01_02 to avoid port chuffing?

Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 16.2 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

Wavecor SW280WA01_02 Enclosure Card
Download SVG Card 📥

Not sure if SW280WA01_02 fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space