AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer
Best box: 31.7 L bass reflex tuned to 37.2 Hz · F3 40.6 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer against your space and targets — instant, no sign-up.
Free, no sign-up to simulate · a free account saves your design
Comparable 8.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 31.7 Liters |
| Tuning Frequency (Fb) | 37.2 Hz |
| F3 (-3 dB Cutoff) | 40.6 Hz |
| F6 / F10 Extension | 34.8 Hz / 30.0 Hz |
| Port Inner Diameter | Ø 6.8 cm |
| Port Physical Length | 20.0 cm |
| First Pipe Resonance | 862.0 Hz |
| Estimated MOL @ F3 | 108.3 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 14.7 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 68.6 Hz |
| F3 (-3 dB Cutoff) | 70.7 Hz |
| F6 / F10 Extension | 53.6 Hz / 40.5 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 30.0 Hz |
| Total Q (Qts) | 0.3 |
| Electrical Q (Qes) | 0.35 |
| Mechanical Q (Qms) | 2.1 |
| Equivalent Volume (Vas) | 67.0 Liters |
| Diaphragm Area (Sd) | 225.0 cm² |
| DC Resistance (Re) | 5.4 Ω |
| Efficiency Bandwidth Product (EBP) | 85.7 |
| Linear Excursion (Xmax) | 8.0 mm |
| Thermal Power (Pe) | 180.0 W |
| Nominal Diameter | 8.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer?
Load Forge's calculated alignment puts AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer in a 31.7 liter vented enclosure tuned to 37.2 Hz, reaching an F3 cutoff of approximately 40.6 Hz.
Can AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 14.7 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 70.7 Hz.
What port dimensions should be used for AudioTechnology 8_a_77_20_06_sd_flexunits_midwoofer to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 6.8 cm with a length of 20.0 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 8_a_77_20_06_sd_flexunits_midwoofer fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space