Vented Specialist

DB Drive WDXPRO9/8NC.8S

Best box: 21.1 L bass reflex tuned to 78.0 Hz · F3 71.0 Hz

Predicted SPL response of the DB Drive WDXPRO9/8NC.8S in the recommended 21.1 L bass reflex box versus the alternative — open it in the simulator Open and tweak this box live ↗

Will it fit your requirements?

Check the DB Drive WDXPRO9/8NC.8S against your space and targets — instant, no sign-up.

Design a box for this driver Box Design with the WDXPRO9/8NC.8S and its T/S already loaded Find alternatives Bass Match ranks similar drivers against the WDXPRO9/8NC.8S in the same box

Estimated retail 119.98 USD · Check price & availability ↗

Free, no sign-up to simulate · a free account saves your design

⚠️ Engineering Notice for Builders

  • Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.

Recommended Bass Reflex (Vented)

PORT BUILDABLE
Net Box Volume (Vb) 21.1 Liters
Tuning Frequency (Fb) 78.0 Hz
F3 (-3 dB Cutoff) 71.0 Hz
F6 / F10 Extension 64.2 Hz / 57.9 Hz
Port Inner Diameter ESTIMATED Ø 10.0 cm
Port Physical Length 11.2 cm
First Pipe Resonance 1537.0 Hz
Estimated MOL @ F3 116.5 dB SPL
Simulate This Reflex Box in App →

Recommended Sealed (Acoustic Suspension)

MAX TRANSIENT DAMPING
Net Box Volume (Vb) 16.6 Liters
System Q (Qtc) 0.707 (Butterworth)
System Resonance (Fc) 132.8 Hz
F3 (-3 dB Cutoff) 133.8 Hz
F6 / F10 Extension 99.3 Hz / 74.2 Hz
Air Spring Linearity High (Zero port compression)
Simulate This Sealed Box in App →

Thiele/Small Parameters

Resonance (Fs) 103.1 Hz
Total Q (Qts) 0.52
Electrical Q (Qes) 0.574
Mechanical Q (Qms) 5.54
Equivalent Volume (Vas) 14.1 Liters
Diaphragm Area (Sd) 220.0 cm²
DC Resistance (Re) 5.8 Ω
Efficiency Bandwidth Product (EBP) 179.7
Linear Excursion (Xmax) N/A mm
Thermal Power (Pe) 300.0 W
Nominal Diameter 8.0"
Catalog Source Load Forge catalog (manufacturer datasheets and retailer listings)

Frequently Asked Questions

What is the recommended ported (bass reflex) box volume for DB Drive WDXPRO9/8NC.8S?

Load Forge's calculated alignment puts DB Drive WDXPRO9/8NC.8S in a 21.1 liter vented enclosure tuned to 78.0 Hz, reaching an F3 cutoff of approximately 71.0 Hz.

Can DB Drive WDXPRO9/8NC.8S be used in a sealed box?

Yes. In a sealed (acoustic suspension) enclosure of 16.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 133.8 Hz.

What port dimensions should be used for DB Drive WDXPRO9/8NC.8S to avoid port chuffing?

Xmax is not published for DB Drive WDXPRO9/8NC.8S, so the port is an empirical estimate: a 10.0 cm diameter with a length of 11.2 cm (area at least 12 in² per ft³ of net volume). Check the air velocity at your power level in Load Forge Studio.

Shareable Acoustic Card for Forums & Social Media

Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.

DB Drive WDXPRO9/8NC.8S Enclosure Card
Download SVG Card 📥

Not sure if WDXPRO9/8NC.8S fits your physical space?

Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.

Run Bass Match for Your Space