DB Drive X-W10D4
Best box: 18.1 L sealed · Fc 50.2 Hz · F3 43.7 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the DB Drive X-W10D4 against your space and targets — instant, no sign-up.
Estimated retail 129.98 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 10.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the DB Drive X-W10D4 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Xmax is not published, so the port size is an empirical estimate (area ≥ 12 in² per ft³ of net volume, minimum by driver size), not a displacement calculation. Check air velocity in Load Forge Studio.
- Straight vent would be 109.2 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 40.3 Liters |
| Tuning Frequency (Fb) | 27.8 Hz |
| F3 (-3 dB Cutoff) | 34.8 Hz |
| F6 / F10 Extension | 28.3 Hz / 21.5 Hz |
| Port Inner Diameter ESTIMATED | Ø 12.5 cm |
| Port Physical Length | 109.2 cm |
| First Pipe Resonance | 158.0 Hz |
| Estimated MOL @ F3 | 108.2 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 18.1 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 50.2 Hz |
| F3 (-3 dB Cutoff) | 43.7 Hz |
| F6 / F10 Extension | 37.6 Hz / 31.2 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 32.3 Hz |
| Total Q (Qts) | 0.45 |
| Electrical Q (Qes) | 0.498 |
| Mechanical Q (Qms) | 4.7 |
| Equivalent Volume (Vas) | 26.6 Liters |
| Diaphragm Area (Sd) | 350.0 cm² |
| DC Resistance (Re) | 4.0 Ω |
| Efficiency Bandwidth Product (EBP) | 64.9 |
| Linear Excursion (Xmax) | N/A mm |
| Thermal Power (Pe) | 300.0 W |
| Nominal Diameter | 10.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for DB Drive X-W10D4?
A simple ported box is not recommended for DB Drive X-W10D4: the textbook alignment (40.3 liters tuned to 27.8 Hz) needs a 109.2 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can DB Drive X-W10D4 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 18.1 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 43.7 Hz.
What port dimensions should be used for DB Drive X-W10D4 to avoid port chuffing?
A straight 12.5 cm port would need 109.2 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if X-W10D4 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space