DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm
Best box: 22.1 L bass reflex tuned to 55.7 Hz · F3 54.5 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm against your space and targets — instant, no sign-up.
Estimated retail 189.99 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 10.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 22.1 Liters |
| Tuning Frequency (Fb) | 55.7 Hz |
| F3 (-3 dB Cutoff) | 54.5 Hz |
| F6 / F10 Extension | 48.3 Hz / 42.5 Hz |
| Port Inner Diameter | Ø 12.5 cm |
| Port Physical Length | 44.7 cm |
| First Pipe Resonance | 385.0 Hz |
| Estimated MOL @ F3 | 115.3 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 9.6 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 100.7 Hz |
| F3 (-3 dB Cutoff) | 100.6 Hz |
| F6 / F10 Extension | 76.4 Hz / 57.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 54.2 Hz |
| Total Q (Qts) | 0.37 |
| Electrical Q (Qes) | 0.405 |
| Mechanical Q (Qms) | 4.28 |
| Equivalent Volume (Vas) | 25.6 Liters |
| Diaphragm Area (Sd) | 350.0 cm² |
| DC Resistance (Re) | 6.8 Ω |
| Efficiency Bandwidth Product (EBP) | 133.8 |
| Linear Excursion (Xmax) | 12.0 mm |
| Thermal Power (Pe) | 500.0 W |
| Nominal Diameter | 10.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm?
Load Forge's calculated alignment puts DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm in a 22.1 liter vented enclosure tuned to 55.7 Hz, reaching an F3 cutoff of approximately 54.5 Hz.
Can DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 9.6 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 100.6 Hz.
What port dimensions should be used for DC Audio - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 12.5 cm with a length of 44.7 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if - Carbon Neo Pro Audio 10" Full Range Speaker (Single) - 4 Ohm / 8 Ohm fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space