SICA 6 C 1 CS - 4
Best box: 5.2 L bass reflex tuned to 72.6 Hz · F3 102.8 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the SICA 6 C 1 CS - 4 against your space and targets — instant, no sign-up.
Estimated retail 39.50 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 6.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the SICA 6 C 1 CS - 4 does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Limited linear excursion (Xmax: 2.5 mm); set a high-pass subsonic filter at 25–30 Hz when driven with high power.
Recommended Bass Reflex (Vented)
PORT BUILDABLE| Net Box Volume (Vb) | 5.2 Liters |
| Tuning Frequency (Fb) | 72.6 Hz |
| F3 (-3 dB Cutoff) | 102.8 Hz |
| F6 / F10 Extension | 84.7 Hz / 64.9 Hz |
| Port Inner Diameter | Ø 5.0 cm |
| Port Physical Length | 17.9 cm |
| First Pipe Resonance | 961.0 Hz |
| Estimated MOL @ F3 | 105.8 dB SPL |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.69 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 0.976; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 6.5 Liters |
| System Q (Qtc) | 0.976 (above Butterworth) |
| System Resonance (Fc) | 120.8 Hz |
| F3 (-3 dB Cutoff) | 101.4 Hz |
| F6 / F10 Extension | 83.1 Hz / 66.2 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 85.4 Hz |
| Total Q (Qts) | 0.69 |
| Electrical Q (Qes) | 0.76 |
| Mechanical Q (Qms) | 7.52 |
| Equivalent Volume (Vas) | 6.5 Liters |
| Diaphragm Area (Sd) | 122.7 cm² |
| DC Resistance (Re) | 3.12 Ω |
| Efficiency Bandwidth Product (EBP) | 112.4 |
| Linear Excursion (Xmax) | 2.5 mm |
| Thermal Power (Pe) | 50.0 W |
| Nominal Diameter | 6.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for SICA 6 C 1 CS - 4?
Load Forge's calculated alignment puts SICA 6 C 1 CS - 4 in a 5.2 liter vented enclosure tuned to 72.6 Hz, reaching an F3 cutoff of approximately 102.8 Hz.
Can SICA 6 C 1 CS - 4 be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 6.5 liters with a Qtc of 0.976 (above Butterworth), the system exhibits an F3 of 101.4 Hz.
What port dimensions should be used for SICA 6 C 1 CS - 4 to avoid port chuffing?
Sized from cone displacement (Sd × Xmax), a minimum port diameter of 5.0 cm with a length of 17.9 cm is suggested; check the port air velocity at your drive level in the Load Forge Studio.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 6 C 1 CS - 4 fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space