SICA 6 L 1.5 SL
Best box: 4.8 L sealed · Fc 104.4 Hz · F3 104.5 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the SICA 6 L 1.5 SL against your space and targets — instant, no sign-up.
Estimated retail 91.00 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 6.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the SICA 6 L 1.5 SL does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Straight vent would be 328.0 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 11.1 Liters |
| Tuning Frequency (Fb) | 57.8 Hz |
| F3 (-3 dB Cutoff) | 55.4 Hz |
| F6 / F10 Extension | 49.4 Hz / 43.7 Hz |
| Port Inner Diameter | Ø 23.3 cm |
| Port Physical Length | 328.0 cm |
| First Pipe Resonance | 52.0 Hz |
| Estimated MOL @ F3 | 106.3 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 4.8 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 104.4 Hz |
| F3 (-3 dB Cutoff) | 104.5 Hz |
| F6 / F10 Extension | 79.1 Hz / 59.7 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 59.0 Hz |
| Total Q (Qts) | 0.39 |
| Electrical Q (Qes) | 0.469 |
| Mechanical Q (Qms) | 2.31 |
| Equivalent Volume (Vas) | 11.0 Liters |
| Diaphragm Area (Sd) | 122.7 cm² |
| DC Resistance (Re) | 5.0 Ω |
| Efficiency Bandwidth Product (EBP) | 125.7 |
| Linear Excursion (Xmax) | 164.0 mm |
| Thermal Power (Pe) | 130.0 W |
| Nominal Diameter | 6.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for SICA 6 L 1.5 SL?
A simple ported box is not recommended for SICA 6 L 1.5 SL: the textbook alignment (11.1 liters tuned to 57.8 Hz) needs a 328.0 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can SICA 6 L 1.5 SL be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 4.8 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 104.5 Hz.
What port dimensions should be used for SICA 6 L 1.5 SL to avoid port chuffing?
A straight 23.3 cm port would need 328.0 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 6 L 1.5 SL fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space