SICA 8 Fe 2.5 CP
Best box: 2.9 L sealed · Fc 177.3 Hz · F3 168.6 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the SICA 8 Fe 2.5 CP against your space and targets — instant, no sign-up.
Estimated retail 126.70 EUR · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 8.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the SICA 8 Fe 2.5 CP does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Straight vent would be 805.1 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 6.1 Liters |
| Tuning Frequency (Fb) | 96.4 Hz |
| F3 (-3 dB Cutoff) | 101.7 Hz |
| F6 / F10 Extension | 88.6 Hz / 76.7 Hz |
| Port Inner Diameter | Ø 44.9 cm |
| Port Physical Length | 805.1 cm |
| First Pipe Resonance | 21.0 Hz |
| Estimated MOL @ F3 | 115.7 dB SPL |
Recommended Sealed (Acoustic Suspension)
MAX TRANSIENT DAMPING| Net Box Volume (Vb) | 2.9 Liters |
| System Q (Qtc) | 0.707 (Butterworth) |
| System Resonance (Fc) | 177.3 Hz |
| F3 (-3 dB Cutoff) | 168.6 Hz |
| F6 / F10 Extension | 129.4 Hz / 98.1 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 73.0 Hz |
| Total Q (Qts) | 0.28 |
| Electrical Q (Qes) | 0.303 |
| Mechanical Q (Qms) | 3.73 |
| Equivalent Volume (Vas) | 15.6 Liters |
| Diaphragm Area (Sd) | 213.8 cm² |
| DC Resistance (Re) | 5.5 Ω |
| Efficiency Bandwidth Product (EBP) | 241.1 |
| Linear Excursion (Xmax) | 210.0 mm |
| Thermal Power (Pe) | 300.0 W |
| Nominal Diameter | 8.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for SICA 8 Fe 2.5 CP?
A simple ported box is not recommended for SICA 8 Fe 2.5 CP: the textbook alignment (6.1 liters tuned to 96.4 Hz) needs a 805.1 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can SICA 8 Fe 2.5 CP be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 2.9 liters with a Qtc of 0.707 (Butterworth), the system exhibits an F3 of 168.6 Hz.
What port dimensions should be used for SICA 8 Fe 2.5 CP to avoid port chuffing?
A straight 44.9 cm port would need 805.1 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if 8 Fe 2.5 CP fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space