DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm
Best box: 5.7 L sealed · Fc 77.8 Hz · F3 69.8 Hz
Open and tweak this box live ↗
Will it fit your requirements?
Check the DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm against your space and targets — instant, no sign-up.
Estimated retail 289.95 USD · Check price & availability ↗
Free, no sign-up to simulate · a free account saves your design
Comparable 10.0" Drivers
Drivers with similar piston area, resonance and Qts — useful alternatives when the DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm does not fit your target box volume or tuning. Each entry links to its full enclosure design and Thiele/Small parameters.
⚠️ Engineering Notice for Builders
- Straight vent would be 364.3 cm long: not physically buildable as a simple tube. Use a passive radiator, a folded slot port or model a 3D folded duct in Load Forge Studio.
Textbook Bass Reflex — not recommended
PORT NOT BUILDABLE| Net Box Volume (Vb) | 4.5 Liters |
| Tuning Frequency (Fb) | 46.8 Hz |
| F3 (-3 dB Cutoff) | 73.1 Hz |
| F6 / F10 Extension | 60.9 Hz / 46.9 Hz |
| Port Inner Diameter | Ø 12.5 cm |
| Port Physical Length | 364.3 cm |
| First Pipe Resonance | 47.0 Hz |
| Estimated MOL @ F3 | 112.8 dB SPL |
Sealed (Acoustic Suspension) — compromise
SUITS INFINITE / OPEN BAFFLEWith Qts 0.719 a Butterworth (Qtc 0.707) box would be many times Vas. A box equal to Vas reaches Qtc 1.017; for a flat response this driver is better used on an infinite (IB) or open baffle.
| Net Box Volume (Vb) | 5.7 Liters |
| System Q (Qtc) | 1.017 (above Butterworth: Qtc cannot fall below Qts (0.72)) |
| System Resonance (Fc) | 77.8 Hz |
| F3 (-3 dB Cutoff) | 69.8 Hz |
| F6 / F10 Extension | 58.0 Hz / 46.8 Hz |
| Air Spring Linearity | High (Zero port compression) |
Thiele/Small Parameters
| Resonance (Fs) | 55.0 Hz |
| Total Q (Qts) | 0.719 |
| Electrical Q (Qes) | 0.802 |
| Mechanical Q (Qms) | 6.98 |
| Equivalent Volume (Vas) | 5.7 Liters |
| Diaphragm Area (Sd) | 346.4 cm² |
| DC Resistance (Re) | 4.0 Ω |
| Efficiency Bandwidth Product (EBP) | 68.6 |
| Linear Excursion (Xmax) | 13.5 mm |
| Thermal Power (Pe) | 850.0 W |
| Nominal Diameter | 10.0" |
| Catalog Source | Load Forge catalog (manufacturer datasheets and retailer listings) |
Frequently Asked Questions
What is the recommended ported (bass reflex) box volume for DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm?
A simple ported box is not recommended for DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm: the textbook alignment (4.5 liters tuned to 46.8 Hz) needs a 364.3 cm port, and no nearby retune stays buildable without a bass hump. A sealed box, a passive radiator or a folded duct is the practical choice.
Can DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm be used in a sealed box?
Yes. In a sealed (acoustic suspension) enclosure of 5.7 liters with a Qtc of 1.017 (above Butterworth: Qtc cannot fall below Qts (0.72)), the system exhibits an F3 of 69.8 Hz.
What port dimensions should be used for DS18 EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm to avoid port chuffing?
A straight 12.5 cm port would need 364.3 cm of length, which does not fit a practical cabinet. Use a passive radiator or a folded/3D duct instead of a straight tube.
Shareable Acoustic Card for Forums & Social Media
Embed this design card on DIYAudio, AVSForum, Reddit, or Facebook. It shows the calculated F3, MOL (when the power rating is published) and box parameters.
Not sure if EXL-X10.2D 10" Cast Frame DVC Subwoofer 2 Ohm fits your physical space?
Don't force a driver into the wrong box. Use Bass Match to calculate which of 8,000+ catalog drivers delivers the highest SPL, lowest F3, and cleanest port air velocity for your exact trunk or room dimensions.
Run Bass Match for Your Space